Catalogue lighting industry: cable holder / suspension systems
16Pages

CABLE HOLDER AND SUSPENSION SYSTEMS

Carl Stahl TECHNOCABLES - We guarantee quality, service and performance The Carl Stahl TECHNOCABLES GmbH, member of the Carl Stahl Group, has been working with technical ropes and strands for decades and is today one of the world‘s market leaders in this field. As a traditional German company, we place the highest value on quality. Utilizing our many years of experience in the field of wire rope technology we are constantly developing new products and solutions for a wide variety of industrial applications. For users in the field of ceiling suspensions, lights, fall arresters, acoustic...

ÜBERSICHT LIEFERPROGRAMM PRODUCT PROGRAM CABLE HOLDER for rope –Ø 1,0 mm – 1,8 mm Stepless adjustment Installation without tools Time-saving installation SUSPENSION CABLES Many standard lengths & diameters in stock Of course we also produce ropes and cables individually according to your requirements. COMPLETE ROPE SUSPENSION SETS Rope suspension sets can be adapted individually to your requirements. Application examples can be found on pages 14 and 15.

CABLE HOLDER Female thread with lateral run out Diameter: 10 mm Male thread with lateral run out Diameter: 10 mm Male thread straight run out Diameter: 10 mm LOOP for quick production of a rope loop Width: 20 mm with locknut with locknut with locknut with locknut HINTS All cable holders are shown approximately in original size, unless otherwise specified. All cable holders are made of nickel plated brass. Other surfaces, depending on quantity, are possible. All cable holders are TUV-Sud certified.

Snap hook straight run out safety latch Opening: 7 mm Eyelet straight run out 0-Ring outside: 24 mm 3-Cable branching straight run out Suitable ropes page 11 Diameter: 14 mm 4-Cable branching straight run out Suitable ropes page 11 Diameter: 14 mm with locknut Busbar clip holder possible sheet thickness: 1 mm Hook straight run out safety latch Diameter: 10.8 mm Please consider the workload table on page 9

CABLE HOLDER HI Swivel head male thread with lateral run out Swiveling about 180° Diameter: 10 mm Cable holder for Y-suspension with slit with lateral run out with slit and knurled screw Diameter: 10 mm Cable holder for Y-suspension with bore with lateral run out with bore and knurled screw Diameter: 10 mm with locknut with locknut with locknut

Ceiling attachment M10x1 Female thread Thread in the bottom: M6 Ceiling attachment M13x1 Female thread Bore in the bottom: 0 7 mm Ceiling attachment M12x1 Female thread with slot 2.5 mm Bore in the bottom: 0 5 mm Immersible M12x1 Male thread with straight run out Collar diameter: 14 mm Ceiling attachment M13x1 Male thread with straight run out For width across flat: 14 Ceiling attachment M10x1 Male thread with straight run out Collar diameter: 12 mm with locknut Ceiling attachment M13x1 Swiveling about 180° for sloped ceilings Head diameter: 16 mm You haven't found your cable holder? Feel...

CERTIFIED SECURITY Of course TÜV-Süd certified All our cable holders are of course TÜV-Süd certified. Download the complete certificate under: www.carlstahltechnocables.com/downlo

a) Screw in the cable and lightly press the button. b) Feed the cable to the desired positon. It will lock automatically with a slight pull. c) The cable may be released by pressing the button and the cable holder may be adjusted freely on the cable. Download detailed instruction manual under: https://www.carlstahl-technocables.com/downloads.html Nominal tensile strength Material Construction End terminal Open rope end 1570 N/mm2 (stainless steel) & 2400 N/mm2 (galvanized steel) Stainless steel or galvanized steel 6x7- WSC Zinc die-cast or pressed out of brass, stainless steel or galvanized...

PRE-ASSEMBLED SUSPENSION CABLES Everything from one single source: Carl Stahl TECHNOCABLES As a wire rope manufacturer with our own cable factory and assembly shop with experience since 1885, we are your expert in the field of steel cables and their applications. In conjunction with our cable holders, we process ropes in the diameter range 1.0 - 1.8 mm. You choose from the materials stainless steel or galvanized steel. Other materials are available on request. By this you will receive complete rope suspension solutions from Carl Stahl Technocables, consisting of preassembled ropes & cable...

Cable with ball 0 6 mm cable - 0 1.2 mm, galvanized steel Cable with ball 0 3.5 mm cable - 0 1.2 mm, galvanized steel for 3- and 4- cable branching Any other length also available Any other length also available Cable with sleeve 0 5 x L 7 mm cable - 0 1.5 mm, galvanized steel Cable with sleeve 0 4 x L 4 mm cable - 0 1.5 mm, galvanized steel Any other length also available Any other length also available Cable with soft eye cable - 0 1.5 mm, galvanized steel Please indicate bolt - 0 and measure B according to your requirements. The dimension A is about twice as large as measure B. Rope with...

PRE-ASSEMBLED SUSPENSION CABLES Rope with drawbar eye Ø - inside 5.1 mm cable - Ø 1.2 mm, galvanized steel Rope with 2 x eyelet Ø - inside 5.4 mm cable - Ø 1.5 mm, galvanized steel Cable with thread M6x10 cable - Ø 1.5 mm, galvanized steel SPECIAL - spring rope with soft eyes cable - Ø 1.6 mm, stainless steel Length in mm Any other length also available You haven‘t found your cable? Feel free to contact us! Depending on project and quantity we develop together with you your specific cable. +49 (0) 7162 4007-2280 +49 (0) 7162 4007-8827 technocables@carlstahl.com www.carlstahl-technocables.

You haven't found your combination? Feel free to contact us! Depending on project and quantity we develop together with you your specific suspension set. O +49 (0) 7162 4007-2280 O +49 (0) 7162 4007-8827 O technocables@carlstahl.com © www.carlstahl-technocables.com

combined with combined with combined with Three and four cable branching in action…

Y-cable holder with slit and lock nut Suspension for NORDIC conductor rail Y-cable holder with bore LOOP – for the swift creation of a loop 15