*mydirectindustry

LE | Z series

Product catalog summary

Overview
High-speed tubular centrifuges in the LE | Z series are designed for separating solid components from fermenter suspensions. They can also separate two liquids and remove solids simultaneously, provided there are suitable density differences. The maximum throughput is reduced during liquid-liquid separation.

Operation
The centrifuge operates by feeding the liquid into the rotor from below while running. The components stratify by density, with liquids discharged continuously and solids remaining in the rotor. It features continuous feed and manual solids discharge.

Specifications

Throughput: Ranges from a few liters to 3,000 l/h.
G-force: Maximum of 16,000 – 80,000.
Solids uptake: 0.25 – 10 liters, depending on the solid.

Technical Data

Type/Model	Throughput min./max. [l/h]	Suggested Throughput [l/h]	Speed [min-1]	RCF (G-value) [* g]	Nominal capacity [l]
LE / LE GP	5/30	15	40,000	40,000	0.25
Z 11	5/30	5	60,000	80,000	0.25
Z 41 / Z 41 GP	20/500	120	20,000	17,000	2
Z 61 / Z 61 GP	50/1500	360	17,000	17,000	6
Z 81	100/2000	480	16,000	18,000	8
Z 101 / Z 101 GP	150/3000	480	14,000	15,500	10

Contact Information
Carl Padberg Zentrifugenbau GmbH
Geroldsecker Vorstadt 60, 77933 Lahr
Phone: +49 7821 9249-0
Email: [email protected]
Website: http://cepa.de/en/le_z_series

Catalog excerpts

Centrifuge technology for chemistry, Biochemistry, Pharmaceuticals Separating and clarifying liquids LE | Z seriesFast. Flexible. Resistant. High-speed tubular centrifuges are used mainly for separating solid components from fermenter suspensions. But this type of centrifuge can also be used to separate two liquids and remove a solid at the same time (only specific density differences are suitable). The max. throughput will be reduced at liquid-liquid separation. The liquid is fed into the rotor from below while the centrifuge is running. The suspension components are stratified by density in the rotor. The liquid(s) is or are discharged continuously via the run-off tray. The solid remains in the rotor. Continuous feed, manual solids discharge Throughput ranging from a few litres to 3,000 l/h g-force max. 16,000 - 80,000 Solids uptake* 0.25 - 10 litres *depending on the solid Technical data Productlink: http://cepa.de/en/le_z_series Carl Padberg Geroldsecker Vorstadt 60 +49 7821 9249-0 Zentrifugenbau GmbH 77933 Lahr [email protected]

Open the catalog to page 1

All Carl Padberg Zentrifugenbau catalogs and technical brochures

Archived catalogs

CEPA High-Speed Centrifuges
1 Page