Centrifuge technology for chemistry, Biochemistry, Pharmaceuticals Separating and clarifying liquids LE | Z series Fast. Flexible. Resistant. High-speed tubular centrifuges are used mainly for separating solid components from fermenter suspensions. But this type of centrifuge can also be used to separate two liquids and remove a solid at the same time. The liquid is fed into the rotor from below while the centrifuge is running. The suspension components are stratified by density in the rotor. The liquid(s) is or are discharged continuously via the run-off tray. The solid remains in the rotor. Continuous feed, manual solids discharge Throughput ranging from a few litres to 3,000 l/h g-force max. 16,000 – 80,000 Solids uptake* 0.25 – 10 litres *depending on the solid Technical data Type/Model Productlink: http://cepa.de/en/le_z_series Carl Padberg Zentrifugenbau GmbH Powered by TCPDF (www.tcpdf.org) Geroldsecker Vorstadt 60 77933 Lahr