GAS OPTIONS All CAF G5 furnaces can be run in reducing or oxidizing gas mode but due to the two different sets of gases the furnace is constructed specifically for the gases that are to be used to the Standard. Maximum gas pressure 276 mbar (4 psi). Test standard Coal & Coke Coal & Coke Solid Recovered Fuels SPECIFICATION SUMMARY Temperature Range Up to 1600 °C (1600 °C required for some biomass samples) Temperature Precision Temperature Control Digital multiple PID terms with gain scheduling and multi offset parameters Temperature Display Work Tube dimensions Tube material Heating Elements (Specific gas choice must be made at time of ordering,see item numbers below) Temperature Ramp Rate Image Resolution BS ISO 540:2008; ASTM D 1857 / D1857M – 04 (2010); DD CEN/TS 15370-1:2006; PD CEN/TR 15404:2010 Automatic or Manual (Coal & coke: DT, ST, H, FT) (Biomass / SRF: IST, DT, HT, FT) Analysis Time 3 runs per working day (including cool down times) Image Collection Pipe to be vented into a separate fume hood Fail safe gas system and CO alarm supplied 700 x 505 x 765 x 970 mm (H x W x Case depth x Overall depth) 84 kg (furnace) Power supply Maximum Sample Load Manual Analysis Automatic Analysis Purge Oxidising Reducing 380 – 415 V, 50/60 Hz two phase 25 A/phase or 220 – 240 V, 50/60 Hz single phase 50 A Power switching Solid state relays Maximum power consumption Environment Conditions Operating Conditions Relative Humidity 5 °C – 40 °C maximum 80 % up to 31 °C decreasing linearly to 50 % at 40 °C Digital – up to 1 frame per 1 °C rise in temperature Overtemperature protection Digital with single high alarm relay Carbolite Gero Limited Parsons Lane, Hope Hope Valley, S33 6RB United Kingdom Carbolite Gero GmbH & Co. KG Hesselbachstr. 15 75242 Neuhausen Germany Subject to technical changes and print errors. Copyright © 2022 by Carbolite Gero ASH FUSIBILITY FURNACE The new Carbolite Gero CAF G5 encompasses and enhances the original features whilst new features such as automated image analysis and increased camera resolution along with zoom facility greatly improve the quality of test results and increased efficiency i

NEW GENERATION ASH FUSIBILITY FURNACE MULTIPLE SAMPLE TESTING AT ANY ONE TIME Today, our latest CAF solution is of particular interest for those who Large coal furnaces suffer from clinker build-up which can result in the A large diameter work tube ensures that only one unit is required to test more than six test pieces at any one time. Heating and cooling rates allow up to three have a requirement to test biomass to the DD CEN/TS 15370-1:2006 closure of the furnace to allow removal. If the fusibility characteristics tests per day to be completed. A grid overlay feature ensures accurate comparisons...