Configuration help for SENSORswitch series CHT1 (Relay Output)
1 / 8Pages

Content: Short description / Technical data (Page 1) Configuration help CHT1 with relay output (Page 2 + 3) Additional information / Connection diagram (Page 4 - 8) Different designs, installation depths and mounting types enable the versatile use of the CHT1 series. Depending on the application, select the SENSORswitch with the appropriate profiU Flush, flat or with raised housing ring. The compact, wear-free and vandal-proof design of CAPTRON's CHT1 SENSORswitches is ideal for use in potentially harsh environments such as machine control, door and access control. In accordance with the requirements of DIN EN 1672-2, the hygienic stainless steel SENSORswitches with edgeless housing ring from the CHT1 series are suitable for applications in the health care sector and in food technology. Depending on requirements, the CHT1 SENSORswitches can also be supplied with a transistor output or a relay output. Please find below the most important features listed: - 0 22,5 mm mounting hole required - total diameter between 28,5mm und 40mm (depending on variant) - 0 20 mm switch surface - Height between 6,5mm and 10mm - Hygienic design (depending on variant) according to DIN EN 1672-1/2 - Feedback - optical signals through two LED colour rings - Impact-resistant - vandal-proof - 100 % water & oil-proof - IP69K - Durable service life - More than 100 million switching cycles (depending on variant) - Switches on touch - high operating comfort, no pressure necessary CAPTRON can provide individual advice to enable you to choose the perfect product from the CHT1 series for the required specifications and applications. Please contact us: Phone: +49 (0)8142 / 44 88 - 160 E-Mail: sales@captron.com Relay Output: Technical data at 24 V and 20 °C: CAPTRON Electronic GmbH www.captron.com Johann-G.-Gutenberg-Str. 7 82140 Olching, Germany

Configuration help for SENSORswitch series CHT1 (Relay Output) CAPTRON Electronic GmbH Johann-G.Gutenberg-Str.7 82140 Olching, Germany www.captron.com Configuration help CHT1 (with relay output) Type code 1 – with standard LED colours Green / Red 1: C1 Type code 2 – with deviating LED colours (e.g. Blue / White) 1: C1 C1 - Switch type Code Switching output Toggle / Flip-Flop C2 & C4 – Mounting / design of the housing ring 2 Code C2 Mounting M18x1 - fixing by means of the knurled nut supplied Aluminium ring natural anodized // Total - Ø = 28,5mm Mounting M18x1 - fixing by means of the...

C6 - Relay output 5 Code Description RS Relay 1x NO (Normally open) RO Relay 1x NC (Normally closed) RSS Relay 2x NO (Normally open) * ROO Relay 2x NC (Normally closed) * rSo Relay 1x NO + 1x NC (Normally Closed + Normally Open) * RW Relay 1x CO (Changeover) * A* These relay versions are only possible with the connection types "7 - single strands 200mm" or “9 - cable + connector Ml2". C7 - Symbol on switch surface Code Description H Hand (green on white) 29 Start (green on white) For further symbols please see our Symbol list (Link)* A * all symbols marked as „Standard“ are already...

Configuration help for SENSORswitch series CHT1 (Relay Output) CAPTRON Electronic GmbH Johann-G.Gutenberg-Str.7 82140 Olching, Germany www.captron.com Additional information & explanations on the previously described configuration items: to 1): The CHT1 series SENSORswitches are equipped with LEDs in the following colours as standard - (LED1 / Operating state) (LED2 / Switching state) The colours are not listed in the article description for the standard version! (> Type Code 1) However, if a different LED colour configuration is required, the two LED colours must be listed in the article...

CAPTRON Electronic GmbH Johann-G.Gutenberg-Str.7 82140 Olching, Germany www.captron.com Configuration help for SENSORswitch series CHT1 (Relay Output) „CHT1-1_8“ – stainless steel hygienic Stainless steel ring in wide version Screw mounting with knurled nut „CHT1-T_8“ – stainless steel Snap-In design Stainless steel ring in wide version Snap-In mounting „CHT1-6_8“ – stainless steel raised design Stainless steel ring in wide version Screw mounting with knurled nut „CHT1-1_8…/CPM20“ – stainless steel design Stainless steel ring in slim design Screw mounting with knurled nut - - - PLEASE TURN...

Configuration help for SENSORswitch series CHT1 (Relay Output) CAPTRON Electronic GmbH Johann-G.Gutenberg-Str.7 82140 Olching, Germany www.captron.com „CHT1-1_X“ – Flush mounting Without housing ring for front plate mounting Assembly with optional locking ring to 3) / Types of connection: Connector M8 („CHT1-_5_...“) Single strands 200mm („CHT1-_7_...“) Single strands 200mm with ferrules (Wire end ferrules with plastic collar DIN 46228; wire cross-section strands 0.25 mm²) to 4) / LED control & connection diagram: LED control LED1 (= e.g. green) lights up in operating state. When the...

Configuration help for SENSORswitch series CHT1 (Relay Output) CAPTRON Electronic GmbH Johann-G.Gutenberg-Str.7 82140 Olching, Germany www.captron.com to 5) / Connection diagram Connection diagram – RELAY OUTPUT: Relay 1x NO (Normally open) Connection diagram „DRS“ Automatic / Relay 1x NO (4-pin) Connection diagram „PRS“ Semi-Automatic / Relay 1x NO (5- pin) Connection diagram „BRS“ Manual / Relay 1x NO (6- pin) Connection diagram „PRO“ Semi-Automatic / Relay 1x NC (5- pin) Connection diagram „BRO“ Manual / Relay 1x NC (6- pin) Connection diagram „PRSS“ Semi-Automatic / Relay 2x NO (7- pin)...

Configuration help for SENSORswitch series CHT1 (Relay Output) CAPTRON Electronic GmbH Johann-G.Gutenberg-Str.7 82140 Olching, Germany www.captron.com Relay 1x NO & 1x NC (Normally Open / Normally Closed) Connection diagram „DRSO“ Automatic / Relay 1x NO + 1x NC (6- pin) Connection diagram „PRSO“ Semi-Automatic / Relay 1x NO + 1x NC (7- pin) Connection diagram „BRSO“ Manual / Relay 1x NO + 1x NC (8- pin) Connection diagram „PRW“ Semi-Automatic / Relay 1x CO (6- pin) Connection diagram „BRW“ Manual / Relay 1x CO (7- pin) Connection diagram „DRW“ Automatic / Relay 1x CO (5- pin) You need...