C65 & C65 ICHP

Product catalog summary

Overview: The document provides technical specifications and features of the C65 and C65 ICHP MicroTurbines, designed for reliable and clean power generation using natural gas. These turbines are noted for their ultra-low emissions and minimal maintenance requirements.

Key Features:

Ultra-low emissions with a single moving part, reducing maintenance and downtime.
Patented air bearing technology eliminates the need for lubricating oil or coolant.
Factory Protection Plans available for 5 and 9 years.
Remote monitoring and diagnostic capabilities.
Integrated utility synchronization and protection, though additional equipment may be required for some utilities.
Small, modular design for easy and low-cost installation.
Proven reliability with tens of millions of operational hours.

Electrical Specifications:

Power Output: 65kW
Voltage: 400–480 VAC
Electrical Service: 3-Phase, 4 wire
Frequency: 50/60 Hz for grid connect, 10–60 Hz for standalone operation
Maximum Output Current: 100A
Electrical Efficiency: 29% LHV

Fuel and Exhaust Characteristics:

Natural Gas HHV: 30.7–47.5 MJ/m3
Inlet Pressure: 517–552 kPa gauge
Fuel Flow HHV: 888 MJ/hr
Net Heat Rate LHV: 12.4 MJ/kWh
NOx Emissions: < 9 ppmvd at 15% O2
Exhaust Gas Flow: 0.49 kg/s
Exhaust Gas Temperature: 309°C

Dimensions and Weight:

C65: 0.76 x 2.0 x 1.9 m, Weight: 758 kg (Grid Connect), 1121 kg (Dual Mode)
C65 ICHP: 0.76 x 2.2 x 2.36 m, Weight: 1000 kg (Grid Connect), 1364 kg (Dual Mode)

Clearance and Sound Levels:

Horizontal Clearance: 0.76 m left/right, 1.65 m front, 0.91 m rear
Sound Levels: 70 dBA for C65, 65 dBA for C65 ICHP at 10 m

Certifications:

Certified to UL 2200 and UL 1741 for natural gas operation.
Complies with IEEE 1547 and meets California Rule 21 and New York State Public Service Commission requirements.
MEA approval for New York City.
Optional equipment available for CE Marking.

Heat Recovery:

C65 ICHP offers integrated heat recovery with copper or stainless steel core options.
Hot Water Heat Recovery: 112kW for copper core, 70kW for stainless steel core.

Catalog excerpts

C65 & C65 ICHP MicroTurbine Natural Gas Achieve ultra-low emissions and reliable electrical/thermal generation from natural gas. • • • • • • • • Ultra-low emissions One moving part – minimal maintenance and downtime Patented air bearing – no lubricating oil or coolant 5 and 9 year Factory Protection Plans available Remote monitoring and diagnostic capabilities Integrated utility synchronization and protection(1) Small, modular design allows for easy, low-cost installation Reliable – tens of millions of run hours and counting C65 MicroTurbine Electrical Performance(2) Electrical Power Output Electrical Service 50/60 Hz, grid connect operation 10 – 60 Hz, stand alone operation Maximum Output Current 100A, grid connect operation Reliable power when and where you need it. Clean and simple.

Open the catalog to page 1

C65 ICHP Heat Recovery(6) Integrated Heat Recovery Module Type Copper Core Stainless Steel Core Hot Water Heat Recovery Weight – Grid Connect Model Weight – Dual Mode Model Horizontal Clearance Left & Right Sound Levels Acoustic Emissions at Full Load Power(12) Nominal at 10 m (33 ft) Certified to UL 2200 and UL 1741 for natural gas operation (UL files AU2687, E209370) Complies with IEEE 1547 and meets statewide utility interconnection requirements for California Rule 21 and the New York State Public Service Commission Materials Equipment Acceptance (MEA) approval for New York City Models available...

Open the catalog to page 2

C65 & C65 ICHP

C65 & C65 ICHP

Catalog excerpts

All CAPSTONE TURBINE catalogs and technical brochures

Archived catalogs