Caplugs offers a full line of hose protection. From the industry-leading Pig’s™ Tail Spiral Wrap to our anti-abrasion sleeve, Caplugs provides a hose protection solution for every application and environment. Manufactured under our stringent ISO certified quality management system, we ensure consistent, quality products. Comprehensive Line of Hose Guard Pig’s Tail™ Spiral Wrap is manufactured from 100% virgin high density polyethylene (HDPE). It is easy to install and designed to provide heavy-duty protection for hydraulic hoses. Fire-Resistant Anti-Static (FRAS) Wrap is a conductive thermoplastic compound on a polyethylene base, designed and certified for safe usage in mines and underground applications. FRAS Wrap has an extremely good balance of mechanical properties and has been tested to MSHA #IC-264/0, AS1180.10B, AS1180.13A and AS2600. NightGlow Spiral Wrap developed from tough HDPE and photoluminescence not only protects your hoses and cables but also emits light, allowing for easy identification of hydraulic lines, equipment and static objects in low light or nighttime conditions. Fluorescent glow lasts up to 12 hours. Service Plugs are designed to plug hoses, rigid pipes, spoon valves and ports on pumps and motors to prevent oils and chemicals from contaminating the environment and preserve costly oils and liquids inside the system during maintenance. No tools required. Anti-Abrasion Sleeve is a tough textile sheath suitable for hydraulic and pneumatic applications. Provides excellent protection against extreme temperatures and abrasion. • Highly durable • Resistant to most solvents, oils, acids and alkalis • MSHA Certified #IC-281 • Protects people and equipment from bursting hoses Electrical Guard is a low-density polyethylene wrap designed to wrap bundles of wires to make neat looms and protect the conductors. It will accommodate a large range of diameters and allows breakouts at any point. Wrap is lightweight and flexible. Wrapman is designed to wrap Pig’s Tail protective spiral wrapping onto hydraulic hoses. • Increases wrapping speeds • Two mounting lugs (to clamp in vice) • Wraps hose assemblies from 1/8 to 2 in. • Easy operation; adjustable screw-in locator 1.888.CAPLUGS | www.caplugs.com/spiralwrap | [email protected] © Protective Industries, Inc. 2019. The information contained herein is proprietary to Caplugs and may not be used or disseminated inappropriately. All trademarks, except where noted, are property of Pro

Pig's Tail™ Spiral Wrap is a high-density polyethylene (HDPE) protective spiral wrap designed specifically for heavy-duty bundling and protection of hydraulic and pneumatic hoses used across various industries. The spiral wrap is UV resistant and can handle extreme temperatures from -40°F through 280°F. It serves as a cost-effective and quick method for minimizing heavy production losses. It protects against losses and damages caused by depreciation, abrasion, regular misuse, poor maintenance or severe working environments. Plus, the wrap's round beveled edges allow for safe and easy installation....

Formula for Spiral Length HOSE OD * SPIRAL ID x HOSE LENGTH = Spiral Length Measurement Example: If you have a 33 ft. hose with an OD of 1.57 in., using the recommended R40SSG, which has an ID of 1.26 in., you would require 41 ft. of R40SSG. 100% Virgin Polyethylene • Excellent abrasion resistance and durability • Very flexible yet durable • Protects from -40°F to +280°F User Friendly • Beveled edges won't cut hose or user • Wall thickness designed for easy installation • Pitch designed to prevent leapfrogging • Install without removing fittings • Can cover only specific areas Multiple Sizes...

Fire-Resistant Anti-Static (FRAS) Pig's Tail wrap is a conductive thermoplastic compound on a polypropylene base. Conductivity is achieved by using special conductive carbon black. In addition to low electrical resistivity, FRAS is flame retardant and has an extremely good balance of mechanical properties. Fire-Resistant Anti-Static (FRAS) Pig's Tail™ Spiral Wrap TESTED TO MSHA #IC-264/0, AS 1180.10B, AS 1180.13A, AS2600 FRAS Pig's Tail™ is available in BLACK only: MSHA APPROVED Part Number 1.888.CAPLUGS | www.caplugs.com/spiralwrap | [email protected] © Protective Industries, Inc. 2019. The...

Developed from high density polyethylene (HDPE) and photoluminescence, NightGlow not only bundles and protects your hoses, it also emits light, allowing easy identification of hydraulic lines, equipment and static objects in low light or nighttime conditions. The fluorescent glow is clearly visible for up to 12 hours and allows burst or ruptured hoses to be identified even in the dark. NightGlow Protective Wrapping NIGHTGLOW Protective Wrapping is perfect for: • Mining Equipment • Earthmoving Equipment • Farming Equipment & Fence/Gate identification • Charged by any light source. Charge all day...

Prevent Spills, Protect the Environment • All plug types for multiple application usage • Food line is made in FDA approved material • Temperature range: -13°F - +194°F • Resistant to most oils and chemicals • For non-pressurized systems only • Always clean before reuse • Does not contain silicone 1. INSERT 2. PUSH 3. TWIST TO SEAT MICRO ^ INDUSTRIAL SERVICE PLUGS INDUSTRIAL SERVICE PLUGS FOOD LINE SERVICE PLUGS FOOD LINE SERVICE PLUGS *Not actual size. c^caplugs' 1.888.CAPLUGS | www.caplugs.com/spiralwrap | [email protected] © Protective Industries, Inc. 2019. The information contained herein...

This very tough, high-quality textile sheath is particularly suitable for the hydraulic and pneumatic sectors. It can be used to bundle multiple hoses or protect a single hose. Thanks to the toughness of the material used, it has optimum resistance to mechanical stress and is compatible with oils and organic products. • Highly durable • MSHA certified #1C-281 • Resistant to most solvents, oils, acids and alkalis • Protect people and equipment from bursting hoses • Customized lengths possible on request 1.888.CAPLUGS | www.caplugs.com/spiralwrap | [email protected] © Protective Industries, Inc....