Wireless Smart Thermostat Datalogger Indoor Temperature Recorder with Thermostat Function WIRELESS NETWORK FOR CNIROY A ENVIRONMENT CUSTOM APPLICATIONS Technical Information Power Supply Indoor wireless thermostat with datalogger capability. Thermostat to control heating or cooling elements. Suitable for centralize the management of different thermal adjustment rings (boilers, area valves, fan coils, air conditioners, electric heaters) in wireless mode. Datalogger capabilities to record operation parameters. Provided with 3 (4 in the WST02TSA model) radio channels allocated as follow: • Indoor temperature measure (read only) • Control knob position measure for local adjustment (read only) • Setpoint adjustment (read/write) • Command setup / relay output status reading (read/write - WST02TSA model only) The WST02TS model is provided withour activation relay and delegates the activation command to the supervisor. In this case the thermostat installation doesn't needs any electric cable. The WST02TSA model is provided with an activation command relay output. Using proper configuration parameters for each channel is also available the remote adjustment of: • Adjustment hysteresis • Local setup control knob operating limit • Operative mode (local/remote) The features shown may be subject to change without notice.

Wireless Smart Thermostat Datalogger Indoor Temperature Recorder with Thermostat Function Connected to a WINECAP basestation allows interfacing with third parties supervisor systems providing two operative modes: Automatic mode: the thermal adjustment ring is directly closed by thermostat which receive from the supervisor only the operating parameters (setpoint) and controls independently the actuator. However an “override” function is available allowing the supervisor the teporary direct control of the relay output (WST02TSA model only). Remote mode: the thermal adjustment ring is remotely closed...