- Catalogs
- Capetti Elettronica
- WSD15TIIDR
WSD15TIIDR
WSD15TIIDR
- Power Supply: 7.7Ah Lithium internal battery (C Type) with a typical life of 5 years at 60-minute sampling intervals.
- Operating Temperature: -30°C to +60°C; Storage Temperature: -40°C to +70°C.
- Radio Frequency: ISM 868MHz with a range of 300m in line of sight.
- Sealing: IP65; Dimensions: 183 x 136 x 86mm; Weight: 1600g; Case Material: Aluminium.
- Temperature: NTC 10K sensor with a range of -30°C to +60°C, accuracy of ±0.2°C at 25°C, and resolution of 0.01°C.
- Inclination: Biaxial MEMS technology with dual range automatic autoscale (±1° and ±15°), resolution of 0.001° (range ±1°) and 0.01° (range ±15°), and accuracy of ±0.5% of the sample.
- Sampling interval is selectable from 5 minutes to 7 days.
- Can interface with MWDG-GSM, WDG-GSM, and WLI-DL-GSM modules.
- Radio range can be extended using up to 32 WR11 repeaters.
- Temperature compensation is achieved through a third-degree polynomial.
- Shock resistance up to 20,000g and excellent stability over time.
Catalog excerpts
Wireless Smart Datalogger Biaxial Vertical Clinometer and Temperature. Technical Information Power Supply Wireless Smart Datalogger Inclination Sensor Type Sensor Type r * Minimum interval depends by WSD configured on the network Biaxial Vertical Clinometer and Temperature Datalogger. The radio module based on WINE protocol provides an excellent radio range and a very low battery consumption. With a backup memory onboard may store the last 64.000 samples per channel even if the wireless link is down. Through the configuration software the sampling interval may be set and two thresholds per channel can be activated. May be interfaced with the following store, processing and transmission modules: • MWDG-GSM • WDG-GSM • WLI-DL-GSM If necessary radio range may be improved using up to 32 WR11 (repeater/radio router) between the datalogger and the data acquisition module. The features shown may be subject to change without notice. WB0140E Rev.04
Open the catalog to page 1All Capetti Elettronica catalogs and technical brochures
WSD02-TT10K1 Page
WSD12-TT10KB11 Page
WSD12-TT10K1 Page
WSD12T-DD3 Pages
WSD12-4VW3 Pages
WSD04T-T1001 Page
WSD04T-T1K1 Page
WSD02T-KK1 Page
WSD02TH-AV2 Pages
WSD04TH1 Page
WR121 Page
WSD12-4NTC10KB12 Pages
WSD12PB-THEE2 Pages
MWLI-MB2 Pages
MWDG-4DI-GSM2 Pages
MWDG-ETH-B2 Pages
WSS10T1 Page
WSS02T-T1001 Page
WSD12-EVTT IM6 Pages
WSD12-EVTT1 Page
WSD12-CC1 Page
WSD02-PQ1 Page
WSD12-PQPQ1 Page
WSD12-4P1 Page
WSD15TIIDR IM5 Pages
WSD12T-Ex1 Page
WSD12-VW IM4 Pages
WSD12-VW1 Page
WSD12T-IIDR1 Page
WSD12PS-4AI1 Page
WSD00TH1 Page
WSD02T-TT1K1 Page
WSD02T-T1K1 Page
WSD02T-T1001 Page
WSD02T-TT1001 Page
WSD15TIDR(A)1 Page
WSD15TIIDRO1 Page
WSD12-PQ1 Page
WSD12-LVD1 Page
WSD12T-AVMS11 Page
WSD12-THEE1 Page
WSD12-TT1K1 Page
WSD02T-DD1 Page
WSD04T1 Page
WSD02-TT1K1 Page
WSD02TH-DD1 Page
WSD02-CC1 Page
WSD00LP1 Page
WSD10TGII1 Page
WSD12-4DI1 Page
WSD10MiGG1 Page
WSD00TH21 Page
WSD00TH2CO1 Page
WSD00TH2L1 Page
WSA02Rx1 Page
WST02TS(A)2 Pages
SD12-VW1 Page
SD15TIIDR1 Page
SD02T-T1001 Page
SD02T-TT1001 Page
SD04T-T1001 Page
SD00TH2 Smart Datalogger1 Page
Archived catalogs
MWDG2 Pages
- Temperature probe
- Transformer
- Dry transformer
- Data logger
- Resistance temperature sensor
- Temperature datalogger
- Communication gateway
- Current transformer
- USB datalogger
- Waterproof temperature sensor
- Industrial gateway
- Encapsulated transformer
- Ethernet gateway
- Humidity and temperature probe
- Fieldbus gateway
- Wireless datalogger
- Stainless steel temperature transducer
- Current sensor
- Datalogger without display
- Lithium battery