Wireless Smart Datalogger Dual NTC10KΩ input channels Technical Information** Power supply 8.5Ah - 3.6V type “C” lithium internal battery Up to 5 years Battery life (*) (samples every 10 minutes and radio signal quality at least sufficient) Measures acquired (2 input channels) Sampling interval (*) Datalogger capacity NTC10K transducer input Selectable from one minute to 24 hours (10 minutes default) Radio coverage 128,000 samples (for each channel) • Operative: -30°C ÷ +60°C • Warehousing: -40°C ÷ +70°C ISM 868MHz Up to 6Km in line of sight Sealing Dimensions Weight Case material Mounting Connections Cable external diameter Copper wire section IP65 90x120x50mm 350g ABS Fix on 4 points Wireless, USB 4.7mm maximum 0.05 ÷ 2.5mm² / ÷ 14 AWG Working temperature Radio frequency (can be extended using WR12 battery powered repeaters) The WSD12-TT10K is a datalogger with 2 NTC10KΩ BETA 3435 input channels, with storage functionality of samples acquired. The radio module High Reliability (unique 868MHz radio technology. implementing frequency hopping on 11 channels) based on WINECAP™ LuPo protocol (Long Range) provides an excellent radio range, low battery consumption and the certainty of data recovery in any situation (black out/ signal obstacles). With a backup memory onboard may store the last 128,000 samples per channel even if the wireless link is down. Samples can be downloaded using a USB connection. NTC10K transducer input Transducer type Measure range Measure accuracy Measure resolution Connection Sensor input Wireless Smart Datalogger. NTC10KΩ BETA 3435 (2 wires) -50°C ÷ +105°C ± 0.5°C @ 40°C 0.01°C Internal terminal block From 0 to 4.5mm Ø cable clamp * battery life may be influenced by fieldwork conditions, sampling interval and system configuration. - refer to User Manual. ** Available with ACCREDIA calibration certificate or manufacturer certificate. The features shown may be subject to change without notice. WB0215E Rev.04 V2.4 CAPETTI ELETTRONICA s.r.l. - Strada Stratta, 57 10090 CASTIGLIONE TORINESE - TORINO - ITALY VAT 04837130014 - Phone +39.011.981.98.11 - Fax +39.011.981.98.210 e-mail [email protected] - web www.capetti.it Using the configuration software, the sampling interval may be set and two thresholds per channel can be activated. May be interfaced with: • all the basestations of MWDG product line all the basestations of MWLI product line If necessary, radio coverage may be extended up to 16 times using WR12 repeaters (battery powered repeaters with battery life up to 7 years) between th