Wireless Smart Datalogger Thermal Energy Technical Information* Power Supply Thermal Energy Selectable on board: Thermal Energy - Weight Counting CH1 CH2 Wireless Smart Datalogger 4 channels datalogger: 2 clean contact or open collector inputs capable to count pulses coming from a thermal energy meter (energy and volume). Channel 3 and 4 are equipped with contact NTC temperature sensors to sample the heat-transfer fluid temperature (flow and return). The radio module based on WINE protocol provides an excellent radio range and a very low battery consumption. With a backup memory onboard may store the last 64000 samples per channel even if the wireless link is down. Through the configuration software the sampling interval may be set and two thresholds per channel can be activated. May be interfaced with the following store, processing and transmission modules: Temperature Temperature - Sensor Type *Available with ACCREDIA calibration certificate or manufacturer certificate • MWDG-GSM • WDG-GSM • WLI-DL-GSM If necessary radio range may be improved using up to 32 WR11 (repeater/radio router) between the datalogger and the data acquisition module. The features shown may be subject to change without notice.. WB0304E Rev.01