Wireless Smart Datalogger Two channels Pulse Recorder / Counter Technical Information Power Supply Battery Life 7.7Ah - 3.6V (“C” type) lithium internal battery 5 years (typical, samples every ten minutes) - Battery life may be influenced by fieldwork conditions - Generic pulse from dry contact or open collector: Measures Acquired  CH1: Generic pulse  CH2: Generic pulse - Compatible with any digital meter with pulse output - Counting Weight Sampling Interval Selectable from one minute to seven days Datalogger capacity Radio Frequency Radio Range Wireless Smart Datalogger Two channels datalogger. Two digital inputs for dry contact or open collector able to count generic pulses, that is not tied to specific units. Case Material The radio module based on WINE protocol provides an excellent radio range and a very low battery consumption. With a backup memory onboard may store the last 128.000 samples per channel even if the wireless link is down. Pulse inputs Connection Internal clamping screw terminal block Sensor input Cable gland (ø from 0 to 4.5mm) Count maximum frequency Using the configuration software the sampling interval may be set and two thresholds per channel can be activated. May be interfaced with:  all the basestations of MWDG product line  all the basestations of MWLI product line If necessary, radio range may be extended using up to 32 WR11 routers (maximum 16 for each path) between the datalogger and the basestation. The features shown may be subject to change without notice. WB0288E Rev.07 CAPETTI ELETTRONICA s.r.l. - Strada Stratta 57 10090 CASTIGLIONE TORINESE - TORINO - ITALY VAT 04837130014 - Phone 011.981.98.11 - Fax 011.981.98.210 e-mail [email protected] - web www