*mydirectindustry

WSD02T-TT100

Product catalog summary

Overview: The document provides technical specifications and features of the Wireless Smart Datalogger model WSD02T-TT100 by Capetti Elettronica. This device is designed for monitoring indoor air temperature and includes dual PT100 sensor inputs.

Specifications:

Power Supply: 2.45Ah lithium internal battery with a typical life of 5 years (sampling every 10 minutes).
Measurements: Indoor air temperature and two PT100 inputs.
Sampling Interval: Configurable from one minute to seven days.
Data Capacity: Stores up to 64,000 samples per channel.
Radio Frequency: Operates at ISM 868MHz with a range of 300 meters in line of sight.
Connections: Wireless and USB options available.
Working Conditions: Temperature range of 0 to 40°C and humidity up to 90% without condensation.
Sealing: IP30 rated.
Dimensions and Weight: 80 x 80 x 25 mm, 100g.
Case Material: ABS plastic.
Mounting: Fixable on 2 or 4 points.

Indoor Air Temperature Sensor:

Type: NTC 10KΩ internal sensor.
Range: 0 to 50°C.
Resolution: 0.01°C.
Accuracy: ±0.2°C within the range of 0 to 50°C.

PT100 Inputs:

Type: Supports 2 and/or 3 wire PT100 sensors.
Range: -100 to +100°C.
Resolution: 0.1°C.
Accuracy: ±0.1°C across the entire range.
Connection: Internal clamp terminal block supporting cables from 0 to 4.5mm diameter.

Additional Features:

Backup memory stores data even if the wireless link is down.
Compatible with MWDG and MWLI basestation product lines.
Radio range can be extended using up to 32 WR11 routers, with a maximum of 16 per path.

Catalog excerpts

Wireless Smart Datalogger Indoor air temperature and dual PT100 input Technical Information* Power Supply Sensor Type Wireless Smart Datalogger Datalogger with an indoor air temperature channel and dual 2/3 wires PT100 sensor inputs. The radio module based on WINE protocol provides an excellent radio range and a very low battery consumption. With a backup memory onboard may store the last 64.000 samples per channel even if the wireless link is down. Using the configuration software the sampling interval may be set and two thresholds per channel can be activated. May be interfaced with: • all the basestations of MWDG product line • all the basestations of MWLI product line If necessary, radio range may be extended using up to 32 WR11 routers (maximum 16 for each path) between the datalogger and the basestation. *Available with ACCREDIA calibration certificate or manufacturer certificate. The features shown may be subject to change without notice. WB0129E Rev.02 CAPETTI ELETTRONICA s.r.l. - Strada Stratta 57 10090 CASTIGLIONE TORINESE - TORINO - ITALY VAT 04837130014 - Phone 011.981.98.11 - Fax 011.981.98.210 e-mail [email protected] - web www.capetti.it

Open the catalog to page 1