Catalogs >
CAPACITEC >
HPB- 40 Button Probe Temperature Ranges A and E

HPB- 40 Button Probe Temperature Ranges A and E
4Pages

Catalog excerpts

US Email: sales@capacitec.com Spec-0013 EU Email: eurosales@capacitec.com Page 1 of 4 Web: www.capacitec.com REV I 6/10/09 AB HPB- 40 Button Probe Temperature Ranges A and E Specifications Temperature Ranges: Temperature Range A Low: 32º F [0º C] High: 302º F [150º C] Temperature Range E Low: -100º F [-73º C] High: 400º F [205º C] Linear Range: 0.020 inches [0.51 millimeters] with a 5 foot [1.52 meters] long Capacitec L2 cable. For cables longer than 5ft consult factory. Maximum Range: 0.040 inches [1.02 millimeters] Calibration: „h A 20 point archived calibration record of voltage output versus nominal displacement is provided standard with every probe. „h Several NIST traceable calibrations are available. Material: Case, guard, and sensor are 303 stainless steel Driven Guard: The guard element is driven with an electronic voltage of 2V to 20V peak to peak. Note, guard must not be grounded. Dip Coating: "-D" epoxy dip coatings are optional to prevent accidental earth grounding or shorting of the elements. Mounting: „h Capacitec HPB probes are intended to be mounted within a countersink. „h See mounting drawing on page 4 for details. Cable: „h Coaxial Capacitec L2 or L3 cable is standard. „h Probe must be calibrated with the cable type and length selected. „h Cable must not be cut or spliced. Probe Thickness: There is one standard thickness and 2 non-standard thicknesses. See drawing for dimensions. Sensor Cable Guard

Open the catalog to page 1

US Email: sales@capacitec.com Spec-0013 EU Email: eurosales@capacitec.com Page 2 of 4 Web: www.capacitec.com REV I 6/10/09 AB HPB- 40 Button Probe Part Number Reference Guide EXAMPLE: HPB-40A-A-L3-5-B

Open the catalog to page 2