Catalogs >
CAPACITEC >
520 AMPLIFIER

520 AMPLIFIER
4Pages

Catalog excerpts

520 AMPLIFIER Capteura® Series Non-Contact Displacement Sensing System Capteura 520 Amplifier New ultra stable, low noise, non-contact capacitive displacement measurement system • New 520-SL dual channel amplifier card with a 2U, 55.5 x 100 mm size • ESD protected inputs • Easy push button calibration Model 208 (8-channel rack) with (4) 520-XL amplifiers and (1) 200-C oscillator card • 0.05% accuracy • Better than 65,000:1 resolution (38nm) with • New 208 and 216 electronic racks are HPC-150E-A-L2-1-B sensor, 200Hz bandwidth and three times smaller than the previous 2.5mm range (double the range of competitive generation systems) • Customer selectable frequencies, 200Hz, 4KHz, or 16KHz Capteura® 200 Series modular 8-channel design versus legacy 8-channel system © 2012 Capacitec, Inc. All rights reserved. • Cable length changes of ≤ 10’ (3.05m) result in <0.2% change in output Lab and field testing has confirmed that the new Capteura 520 has the industry best performance combining small sensor size and large displacement range with long cable lengths

Open the catalog to page 1

The Capteura 520 Amplifier rack system combines two amplifiers into each card slot allowing it to be twice as dense as most systems. Its small size allows for a smaller rack than the previous generation. The Capteura 520 Amplifier is available in three different form factors powered by either 90-240VAC or 9-36VDC power input. The 208 rack has 4 card slots for up to 8 channels and the 216 rack has 8 card slots for up to 16 channels. The rear panel of the 208 and 216 racks hold a single-ended BNC connector for each primary analog output plus one or two secondary 25-pin D-Sub connectors...

Open the catalog to page 2

The Capteura 520 multi-channel capacitive amplifier systems are configured according to user-specific needs. They can be built in several different configurations of bandwidth vs. signal to noise ratios and differential analog outputs. • 200-ENC Single card enclosure • 520-XLC Amplifier card with 200-CP oscillator • 200-CP Oscillator module / DC power converter • 200-DAQ DAQ card (requires separate 200-CP) Model 520 Amplifier Specifications © 2012 Capacitec, Inc. All rights reserved.

Open the catalog to page 3

Accessories Optional Accessories Capacitive Displacement Sensors Full line of standard cylindrical, threaded and button sensors Thin Capacitive Probes Standard models from .004” [0.1mm] thickness with .100” [2.54mm] linear range US HEADQUARTERS Capacitec, Inc. 87 Fitchburg Road P.O. Box 819 Ayer, Massachusetts 01432 USA TEL: 978-772-6033 FAX: 978-772-6036 email: sales@capacitec.com www.capacitec.com Disc Brake Wear Analysis Sensors The model HPC-150C-H-IC-00 sensor assembly combines the benefits of small size and high temperature 750°F (400°C) Wand Holders Wand holders with adjustable...

Open the catalog to page 4