*mydirectindustry

Catalogs
CAPACITEC
508-SW SWITCHING AMPLIFIER

508-SW SWITCHING AMPLIFIER

Product catalog summary

Overview: The Capteura® 508-SW is a multiple channel switching amplifier designed for industrial applications requiring high linearity and stability in displacement, gap, and bore measurements. It offers a cost-effective solution by eliminating the need for external A/D converter cards and provides direct interface to PLC controllers via Ethernet.

Key Features:

Supports 8 displacement channels or 4 gap calibrations stored internally.
Includes an integral 18-bit Analog to Digital Converter.
Compatible with all Capacitec Probes and is microprocessor-based.
Offers a linearity of 0.05% FS and a switching frequency up to 500 Hz.
Power options include USB (standard) and optional battery-powered Bluetooth 4.0.
Requires an external power supply for Ethernet (5VDC @ 250mA).
Outputs engineering units as a serial string with optional Ethernet IP and Command Set Software.

System Specifications:

Dimensions: 9.5” X 4.25” X 1.25” (241mm X 108mm X 32mm).
Bandwidth: 500Hz, with 5 channels at 100 Hz per channel.
Linear Range: Typically 2/3 of the probe’s sensor diameter.
Temperature Stability: 110 ppm/°C from 0 to 60°C.
ESD Protection: For sensor, guard, and electronic ground.
Power Consumption: Less than 1.2 watts via Ethernet or Bluetooth.
Input Connectors: Options include TRW (3 channel) and Souriau (8 channel).
Power Options: AC wall adapter or USB power at 5VDC @ 250mA.
Extension Cable: 10-foot cable with minimal output effect, extendable to 32.8 feet.
Output: Digital only via USB, Ethernet, or Bluetooth.

Configuration Options: The system can be configured for 1 to 8 channels based on user-specific needs, with the one-channel option offering high throughput at 3.5kHz.

Catalog excerpts

ACapacitec® 508-SW SWITCHING AMPLIFIER Capteura® Multiple Channel Switching Amplifier Capteura® 508-SW Switching Amplifier Where multiple channels are required at lower speeds, the new low cost multiple channel signal conditioner returns very high linearity & stability of individual channels. The system eliminates the additional cost of any external A/D converter cards while offering direct interface to PLC controllers via Ethernet. The compact switching configuration is ideal for a large number of industrial process displacement, gap and bore measurements. ■ 8 d isplacement channels or 4 gap calibrations stored internally ■ Integral 18 bit Analog to Digital Converter ■ Compatible with all Capacitec Probes ■ M icroprocessor based ■ Linearity: 0.05% FS ■ Switching frequency up to 500 Hz (e.g. 5 channels/100 Hz per channel) ■ USB powered (standard) ■ Battery powered Bluetooth 4.0 (optional) ■ Ethernet with external power supply required (5VDC @ 250mA) ■ Output Engineering units - Serial string ■ Eth ernet IP Software (optional) ■ Command Set Software (optional) © 2015 Capacitec, Inc. All rights reserved.

Open the catalog to page 1

The Capteura 508-SW Switching Amplifier Systems are configured according to user-specific needs. They can be built in several different configurations of 1 to 8 channels. The one channel option has very high throughput (3.5kHz) 3 sensor input view with TRW/Souriau connectors Model 520 Amplifier Specifications Size (with enclosure) © 2015 Capacitec, Inc. All rights reserved.

Open the catalog to page 2

All CAPACITEC catalogs and technical brochures

Archived catalogs

Disc Brake
4 Pages
Standard products
12 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list