RAFt Product Sheet
3Pages

RAFt System Raised Access Floor technology A RAFtTM is an installation frame which is used under a cabinet, in place of a floor tile in raised floor installations, to provide extensive benefits. Advantages & Benefits The RAFt sits on the pedestal heads integrating into the raised floor installation RAFts are bayed, just like cabinets Saves cost when compared to old fashioned installation methods Saves considerable installation time No tile cutting needed - saving further cost and mess Provides massive cable entry through base Base air flow is exceptional but may be sealed with Cannon diaphragm Secures cab to pedestal system avoiding the need for tie bars to the floor substrate Rigidifies lateral movement of raised floor installation Allows minimised aisle widths and avoids cut tiles in aisle even for 1000mm deep cabinets as tiles in aisle slide under cabinet Tiles in aisle can be lifted due to clearance of raised cabinet base (cabinet sits 50mm above tile surface) RAFt accessories include brackets for commando connectors enabling power connections at RAFt level avoiding the need to enter floor void for power connection to PDUs etc Saves pedestal costs, no tile cutting, speedier install, simplifies planning Avoids the need for intermediate pedestals. Only 600mm pitch pedestals are required, as no cut tiles means no intermediate pedestals Order Codes 600mm wide To suit cab footprint Central Rear overhang 600 x 600 600 x 800 600 x 1000 600 x 1200 435B02606020 435B02608020 435B02609920 435B02601220 435B02608025 435B02609925 - To suit cab footprint Central Rear overhang 700 x 600 700 x 800 700 x 1000 700 x 1200 435B02706020 435B02708020 435B02709920 435B02701220 435B02708025 435B02709925 - To suit cab footprint Central Rear overhang 800 x 600 800 x 800 800 x 1000 800 x 1200 435B02806020 435B02808020 435B02809920 435B02801220 435B02808025 435B02809925 - 700mm wide 800mm wide RAFt has been shown highlighted in red Size conversions: 1U = 44.45mm = 1 3/4” 2.1 600mm = 24” 700mm = 28” 800mm = 32” 1kg = 2.2lbs

RAFt System Raised Access Floor technology The Cannon RAFt System is compatible with the majority of Raised Access Floors with a modular tile size of 600mm x 600mm in current use worldwide. Installation of the Cannon RAFt System is very simple as the system is designed to replace complete floor tiles in Raised Access Flooring where Cannon cabinets are to be installed. RAFt Depth The RAFt consists of a series of individual ‘picture frames’ which are bolted together and which always have the same depth (front-to-back) dimension as a floor tile (600mm). Cabinets with a depth (front-to-back)...

RAFt System Brackets RAFt SYSTEM 600, 700 & 800 wide versions RAFt Width It is preferable that the frame width matches the cabinet width (600, 700 or 800mm). A 700 wide or 800 wide RAFt is laid out in the same manner as the 600 wide RAFt except from the position of clamp brackets and the end of raft position. Where a RAFt is built up from a multiple of frame widths other than the tile modular width of 600mm, it is likely that a part tile will be needed to act as a ‘filler’ at the end of the bay. A bracket is available (Order code: 307C00025002 cut tile support ) which bolts to the end of...