RIM Mixing Head: four component high pressure head for the use of abrasive fillers pre-blended in the chemical components
2Pages

Add to favorites

{{requestButtons}}

Catalog excerpts

RIM - Four Components Head Four components high pressure mixing head designed for the use fillers pre-blended in the chemical components. Recycling phase Pouring phase * When the Total min output is <1100 cc/sec it could be necessary to use only 2 opposed injectors [one for each component] to reach the optimum mixing quality ** When the Total min output is < 4500 cc/sec it could be necessary to use only 2 opposed injectors [one for each component] to reach the optimum mixing quality ALL values are calculated in cc/sec considering component viscosity <1000 cps without filler and 150 bar pressure. In case of filler the values have to be considered as indicative. DEDICATED INDUSTRIAL SOLUTIONS

Open the catalog to page 1

All data are subject to variation without notification due to continuos technical/technological developments Via Galileo Ferraris, 65 - 21042 Caronno P.lla, [VA) Italy - Tel. +39 0296531 - www.afros.it

Open the catalog to page 2

All Cannon Spa catalogs and technical brochures

1. 

   FPL SR Head

   2 Pages

2. 

   AX head

   2 Pages

3. 

   MAXFOAM SLABSTOCK

   15 Pages

4. 

   InterWet - Internal Wetting Long Fibre

   2 Pages

5. 

   ECO-SLAB Foam Production

   14 Pages

6. 

   CANNON THERMOFORMING MACHINES

   14 Pages

7. 

   CONTINUOUS LINES

   28 Pages

8. 

   DISCONTINUOUS PANELS

   20 Pages

9. 

   A-PRIMA

   8 Pages

10. 

    EasyFroth

    8 Pages

11. 

    B-CAST

    4 Pages

12. 

    LWRT

    2 Pages

13. 

    Industrial Solutions

    2 Pages

14. 

    Preformers

    2 Pages

15. 

    Automatic release agent‐free moulding process

    2 Pages

16. 

    POLYURETHANE PROCESSING

    2 Pages

17. 

    A-Compact: High Pressure Metering Machines for Polyurethanes and Bi-Component Resins

    4 Pages

18. 

    E-System Enhanced: the New Generation of Dosing Units for HP-RTM

    8 Pages

19. 

    JL Mixing Head: a new concept for the mixing of the components, the turbolence necessary to mix the chemicals is created by speed

    2 Pages

20. 

    LN Mixing Head: Two Components Straight-Through Mixing Head suitable for the most common applications of the Polyurethane chemistry

    2 Pages

21. 

    L Mixing Head: Two Components Straight-Through Mixing Head suitable for the most common applications of the Polyurethane chemistry

    2 Pages

22. 

    FPL10 QCC Mixing Head: two components high pressure mixing head designed for the quick change of a third component

    2 Pages

23. 

    FPL AD Mixing Head: two components head designed for the use of pre-blended abrasive fillers

    2 Pages

24. 

    Vertical diecasting machine

    2 Pages

25. 

    AX Mixing Head: multicomponent high pressure head designed to handle up to 5 streams simoultaneously

    2 Pages

26. 

    SPOT LX

    2 Pages

27. 

    A2 - Programmable Automation Controller with EtherCAT or Sercos® Master Interface

    2 Pages

28. 

    FLAT PANEL MONITOR

    2 Pages

29. 

    FPL AN Mixing Head: three component high pressure head with axial injection of a third non abrasive component

    2 Pages

30. 

    FP2L Mixing Head: four components high pressure head designed to handle alternatively two different formulations

    2 Pages

31. 

    FPL Mixing Head: two components, L shaped high pressure head

    2 Pages

32. 

    High Pressure Metering Machines for Polyurethanes A-System

    8 Pages

33. 

    High-Pressure Metering Machines for Polyurethanes AP

    2 Pages