NEW TURNING LINE

Product catalog summary

Overview: The document introduces a new line of turning tools by Canela, available in various grades (TN15, TN20, TN30, TN35) and chipbreaker references (FC, FMC, MHC, MC, MFC, RC). These tools are designed for different machining applications, focusing on steel, stainless steel, and high-temperature alloys.

Chipbreaker Specifications:

FC Chipbreaker: Designed for light finishing operations at high speeds with a feed range of 0.08 mm to 0.3 mm and cutting depths of 0.2 to 2.5 mm.
FMC Chipbreaker: Suitable for finishing with a differential profile to improve thermal diffusion, with cutting depths of 0.5 to 2.5 mm and feed of 0.05 to 0.25 mm.
MC Chipbreaker: Provides a positive rake angle for medium-duty applications, recommended for general use on steel and stainless steels, with cutting depths of 1.0 to 3.5 mm and feed of 0.15 to 0.35 mm.
MFC Chipbreaker: Offers excellent chip control for light-duty applications on carbon alloys, with cutting depths of 0.5 to 4.0 mm and feed of 0.15 to 0.5 mm.
RC Chipbreaker: Suitable for high feed rates and depths of cut, with cutting depths of 1.5 to 5 mm and feed of 0.3 to 0.5 mm.

Grade Definitions:

TN15: Wear-resistant finishing to intermediate grade, suitable for high-speed applications on steel, cast iron, stainless steel, and high-temperature alloys.
TN20: General-purpose wear-resistant grade with enriched substrate for good deformation and fracture resistance, used at lower speeds than TN15.
TN30: Similar to TN20, used for demanding metal removal operations, including cutting through scale at low speeds.
TN35: Developed for machining stainless steel and heat-resistant alloys, used with the MC chipbreaker.

Applications: The tools are designed for various machining operations, focusing on wear resistance, heat resistance, and suitability for different materials and speeds.

Catalog excerpts

NEW TURNING LINE NEW TURNING LINE

Open the catalog to page 1

The RC chipbreaker is suitable for high feed rates and depths of cut that normally require single-sided inserts. The chipbreaker has a wide negative T land, which gives high edge strength. Main application area: Cutting depth (Ap): 1,5 - 5 mm Feed (f): 0,3 - 0,5 mm CNMG 120408-MC DNMG 150608-MC TNMG 160408-MC WNMG 060404-MC WNMG 060408-MC WNMG 080408-MC CNMG 120408-MFC DNMG 150608-MFC TNMG 160408-MFC WNMG 080408-MFC Alternative chipbreaker for medium cutting of general steel and alloy steel. First recommendation for medium-heavy cutting of mild steel. Main application area: Cutting depth (Ap):...

Open the catalog to page 2

All CANELA EINES catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list