CUTTING TOOLS
570Pages

CANELA CUTTING TOOLS The Flow-Master coolant system works by delivering the machine coolant with maximum efficiency. The volume and speed of coolant coming out direct to the insert cutting edge improves machining performance. Flow-Master tooling is extremely effective removing heat from the cutting edge, cooling the chips rapidly and helping to break them faster. Chips with poor heat removal are malleable and flexible, not breaking properly and adding extra heat to the cutting edge. Chip with Flow-Master toolholder Chip with conventional toolholder

CANELA CUTTING TOOLS MIlLING Highlights The Ecomill series features a highly effective 45 degree face mill with very strong square inserts with positive cutting angles. The result is effective machining and lower costs thank to its 8-cornered inserts. Diameter range of 2.00-5.00 inches. For more information see pages G32 Ecomill is a highly efficient double-sided 90-degree shoulder face mill with negative inserts, but with positive cutting angles. This is a low cutting force cutter, where both sides of the insert can be used to benefit the overall economy. For more information see pages G18...

CANELA CUTTING TOOLS The Mill-Plus insert features a high helix sharp cutting edge, which in turn provides fast metal removal. Mill-Plus milling cutters can be used for very steep helical interpolations for penetration into deep cavities. Chamfers, V-cuts, undercuts, preparation for welding, and deburring operations along the workpiece edges are frequent operations. Depending upon the type of machine and set-up, these operations can be performed in a variety of ways. Chamfer-Plus is suitable when a long edge cutter is needed.

CANELA CUTTING TOOLS Canela presents its range of PSC tools and holders. These tools are widely used for the most productive machining operations on lathes with either manual or automatic tool changers, multitask machining centers and vertical turn-mill machines. Both quick change adaptation systems include integral shank tools and a wide variety of stationary and rotating machine turret and spindle adapters, extensions, reducers and toolholders.

CANELA CUTTING TOOLS

CANELA CUTTING TOOLS TOOLING Highlights Member of CANELA Group CAT 50 Characteristics: Cylindrical antivibratory shell mill adaptors. CAT 50 Special for mould and die makers Vibration reduced up to 60% compared to any other conventional shell mill adaptor, as they are manufactured with materials and mechanisms having antivibration properties. For more information see pages F04 to F05

CANELA CUTTING TOOLS Antivibratory shell mill adaptors HSK DIN 69893-1 Characteristics: Cylindrical antivibratory shell mill adaptors. HSK DIN 69893-1 For cutters with driving slot DIN 138. Special for mold and die makers. PSC ISO 26623-1 MATERIAL: - Chromium-manganese carburized steel 1.7131 (16MnCr5). EXECUTION: - Carburized, hardened and tempered. - Surface hardness HRC 58±2 (670±40 HV30) - Depth of carburized layer minimum 0,5 mm. - Tensile strength in core minimum 800 N/mm2 after carburizing. ACCURACY: - Taper according to DIN 254 - Taper angle: tolerance AT 3 DIN 7178 part 1 and DIN...

CANELA CUTTING TOOLS SOLID CARBIDE Member of CANELA Group HIGH PERFORMANCE

CANELA CUTTING TOOLS SOLID CARBIDE

CANELA CUTTING TOOLS CERAMIC Highlights Ceramic milling cutters Ceramic inserts run faster than carbide inserts, so productivity is highly increased in high-temperature machining.

CANELA CUTTING TOOLS Ceramic tool systems Canela ceramic clamping systems enable productive turning of cast iron, steel, hardened steels and other difficult to machine materials. Three proven clamping systems support customers in all machining tasks.

CANELA CUTTING TOOLS SPECIALS Highlights Canela develops innovative tooling solutions for aerospace. The range includes tools for lighter materials that reduce airframe weight, materials such as high temperature alloys, composite materials, and aluminum alloys. Canela produces tooling products for a variety of applications uniquely suited for high efficiency machining of super alloys as well as other difficult-to-machine aerospace materials.

CANELA CUTTING TOOLS Canela supplies special tools for all machining needs, taking into consideration the characteristics of machine tool, workpiece and cycle time. Our cutting tools specialists support initial tooling set-up, test periods and analyze machining processes in existing machine lines.

CANELA CUTTING TOOLS DRILLING Highlights Brand new square insert design for maximum drilling efficiency. Excellent cutting performance and chip control due to the optimized geometry and chip breaker of the inserts, central and peripheral.

CANELA CUTTING TOOLS Canela has enhanced its drill program with the addition of the PSC clamping system for indexable inserts. The 45.. drills range in diameter from 0.591 to 1.693 inches with a depth of cut of 3xD. For more information see pages E77 to E79 Trepanning drills Trepanning is used for larger hole diameters and where machine power is limited, because it is not as power consuming as solid drilling. The trepanning tool does not machine the whole diameter, only a ring at the periphery. Instead of removing all the material in the form of chips, a core is left in the center of the...

CANELA CUTTING TOOLS Geometries CVD coated carbide PVD coated carbide Uncoated carbide Cermet Ceramic CBN / PCD Inserts selection Grade chart Label designation system ISO Code key 80º Rhombic inserts 55º Rhombic inserts KNUX inserts Round inserts Square inserts Triangular inserts 35º Rhombic inserts 80º Trigon inserts Ceramic inserts CBN/PCD Inserts Clamping systems Code system ISO Dimple lock toolholders Wedge clamp toolholders Double lock toolholders Top clamp toolholders Center screw toolholders Cutting data Clamping systems Code system ISO Dimple lock boring bars Double lock boring bars...

CANELA CUTTING TOOLS Code system Lever lock cartridges Double lock cartridges Top clamp cartridges Center screw cartridges Grades Inserts for parting and grooving Toolholders Tool blocks Blades Top Notch tools Cutting data Code system Threading inserts External threading Internal threading Cutting data Technical information CERAMIC TOOLS Ceramic tools D03-07 D09-18 Ceramic inserts Toolholders