1. Catalogs
  2. Canberra Industries
  3. Geiger Mueller Detectors - GP Series

Geiger Mueller Detectors - GP Series

Geiger Mueller Detectors - GP Series

Geiger Mueller Detectors - GP Series

Product catalog summary
Overview
The GP Series Geiger Mueller Detectors are rugged, halogen-quenched GM tubes designed for wide-range gamma radiation measurement. They utilize the patented Canberra Time-to-Count technique, which eliminates the limitations of conventional GM tubes, such as dead time and saturation effects. These detectors are SMART probes, storing calibration data in non-volatile memory, allowing for interchangeability without recalibration.

Key Features
  • Patented Time-to-Count technique for improved accuracy and linearity.
  • SMART Probe technology with non-volatile memory for calibration data.
  • Maintenance-free design with no routine servicing required.
  • Calibration cycles extend up to two years.
  • Optional mounting brackets and compatibility with Canberra's area monitor and display units.

Principle of Operation
The GP Series uses a pair of halogen-quenched GM tubes for gamma radiation detection. The Time-to-Count technique involves rapidly increasing the bias voltage to 500 V dc, initiating a time count until a GM tube pulse is detected. This method ensures full-size pulses and a statistically reliable average time-to-count, providing a linear performance over many decades.

Specifications
  • Detector Type: Halogen Quenched GM Tubes.
  • Resolving Time: 1 µs.
  • Operating Voltage: 450–550 V dc.
  • Dynamic Range: 9 decades.
  • Energy Range: 80 keV to 3.0 MeV.
  • Linearity: ±5%.
  • Operating Temperature: –30 °C to +50 °C.
  • Power: +5 V dc.

Models and Applications
  • GP100, GP100SI: General area monitoring.
  • GP100C, GP100CS: Includes 0.1 µCi 90Sr Check Source Assembly for calibration checks.
  • GP100M, GP100MS: Used with PA100M preamplifier for remote placement up to 200 feet.
  • GP110, GP110SI: High sensitivity for low-level environmental monitoring.

Quality and Compliance
The GP Series detectors are manufactured under a quality system compliant with ISO 9001, 10CFR21, 10CFR50 Appendix B, IEEE-730, and ANSI/ASME NQA standards.

Contact Information
For further inquiries, contact Canberra's international offices or visit their website.
See more

Catalog excerpts

Geiger Mueller Detectors - GP Series-1

Benelux/Denmark (32) 2 481 85 30 ҕ Canada 905-660-5373 ? Central Europe +43 (0)2230 37000 ? France (33) 1 39 48 57 70 ? Germany (49) 6142 73820 Japan 81-3-5844-2681 ? Russia (7-095) 429-6577 ? United Kingdom (44) 1235 838333 ? United States (1) 203-238-2351 > For other international representative offices, visit our Web Site: http://www.canberra.com or contact the Canberra U.S.A. office.C10219 3/03 Printed in U.S.A. size="-2">

 Open the catalog to page 1
Geiger Mueller Detectors - GP Series-3

Generic Specifications GP100M and GP100MS are used in conjunctionwith a preamplifier, PA100M. This arrangementallows components that are susceptible to damageby extended exposure to radiation to be placed up to 200 feet away from the detectors. Once calibrated thedetector and preamplifier must be kept together as apair to maintain the calibration. Functionally, the GP100M/GP100MS detector and its pair preamplifieroperates as a SMART probe. (Applicable to GP100, GP100SI, GP100C, GP100CS,GP100M, GP100MS, GP110, GP110SI)DETECTOR TYPE ֖ (2 ea) Halogen QuenchedGM Tubes.RESOLVING TIME 1 ֵs.PLATEAU...

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.