Catalog excerpts
Connectors 12G -BNC 75Ω SDI Connectors Website 75Ω BNC Crimp Plugs Canare added the new BCP - D series for 12G - SDI. SMPTE ST 2082 - 1 fully compliant connector makes UHD solutions as simple as existing SDI systems. The world’s highest quality BNC includes BCP - B for 3G - SDI, BCP - A/C for up to HD. Return Loss : 20 dB @ 6 GHz, 15 dB @ 12 GHz Suitable Cable Return Loss : 26.4 dB @ 3 GHz Suitable Cable Suitable Cable Canare • Standard package (20pcs/100pcs). Note : Suitable die set for BCP - A5F is TCD - 35CA; do not use TCD - 5CF/TCD - 55FA for BCP - A5F. Be sure to use Canare Crimp Tool • Canare crimp design ensures quick and reliable installation. • Gold plated “snap locks” center pin and beryllium copper outer contact. • Elongated body design for stable finger grip. • Position mark on the body makes it easier to check if the connector is locked.
Open the catalog to page 1■ BCP - LC Series (Right Angle) Suitable Cable Return Loss : 26.4 dB @ 2 GHz (*2) Suitable Cable Coming soon Fiber - Optic Systems • Canare crimp design ensures quick and reliable installation. • Gold plated “snap locks” center pin and beryllium copper outer contact. Be sure to use Canare Crimp Tool 75Ω Slim BNC Crimp Plugs • Slim design : O.D. 12 mm • Compatible with 75Ω BNC receptacles. • Canare crimp design ensures quick and reliable installation. • Gold plated “snap locks” center pin and beryllium copper outer contact. Crimp sleeve Be sure to use Canare Crimp Tool Multichannel Systems...
Open the catalog to page 2Connectors 75Ω BNC Connectors 75Ω BNC Solder Plugs Return Loss : 26.4 dB @ 1 GHz Suitable Cable • The tubular (ferrule) section is silver plated to make soldering easier. • Cable stripper TS100E can be used. (Excluding BCP - H31F, BCP - H51F) 75Ω BNC Jack Plug Suitable Cable • Return loss for BCJ - C : 26.4 dB @ 1.5 GHz, 20.8 dB @ 2.4 GHz • Return loss for BCJ - D : 20 dB @ 3 GHz, 15 dB @ 6 GHz, 10 dB @ 12 GHz Be sure to use Canare Crimp Tool 75Ω BNC Termination Plugs Model • Includes 1/4 watt resistance. • Return loss for BCP - TK : 26.4 dB @ 3 GHz, 15 dB @ 12 GHz Our best selling...
Open the catalog to page 3Return Loss : 15 dB @ 12 GHz Description BCJ - JRUK Flush - mount Technical Trend • Redesigned for 12G - SDI to minimize return loss. 2.4 Rear - mount Rear - mount, w/Ground Lug Flush - mount Fiber - Optic Systems Flush - mount Suitable Cable ■ Panel Jack (Jack to Solder and Crimp) Return Loss : 26.4 dB @ 1 GHz • Panel Jack covers the rear wiring part with metal crimp sleeve. • Flush - mount receptacle prevents damage on the jack. Canare BCJ-RU design marked models accept insulation bushing IU - 7/16, and the panel hole for IU - 7/16 should be adopted in this case. (see below) Multichannel...
Open the catalog to page 475Ω BNC PCB Mount Receptacles (Screw Type) ■ Front Mount Stud Position Right Angle Right Angle, Dual Jack, Right Angle, Triple Jack Straight, Dual Jack Right Angle, Dual Jack Standard Package Panel Mount • True 75Ω PC board mount receptacle. • Gold plated beryllium copper center contact. • Right Angle types can be fixed on PC board with M2.6 screw. • Space - saving design • Eliminates wiring material and cost. Note : Any cleaning solvents cannot be used. This leads to insulation problems. Insulation material : m - PPO (m - PPE) 16 < Return loss > BCJ - BPLHK : 26 dB @ 1.5 GHz, 20 dB @ 3...
Open the catalog to page 5Stud Position Right Angle Right Angle, Low Cost Right Angle, Long Neck Right Angle BCJ - FPLV - 12G Vertical Front : Hex nut and lock washer Description Straight, Through Hole Mount Straight, Surface Mount Panel Mount Rear : Hex nut and lock washer Return loss for BCJ - FPLV - 12G VSWR Return loss for BCJ - FPLVA S11(dB) 0 Right Angle Note : Any cleaning solvents cannot be used. This leads to insulation problems. Insulation material : m - PPO (m - PPE) • BCJ - FPLV - 12G is specially designed to minimize the return loss for 12G - SDI. • Return loss : BCJ - FPLV - 12G : 15 dB @ 6 GHz, 10 dB...
Open the catalog to page 6Connectors Active BNC 12G - SDI Active BNC 12G - SDI Active BNC integrating I/O interface device inside. It frees you from struggling with PCB design coping with return loss and board space. *Card Edge Connector NOT included Right Angle Cable Driver Cable Equalizer Cable Driver & Equalizer Cable Driver Cable Equalizer Cable Driver & Equalizer Sales unit : 5 pcs • Assembled on a PC board with SMT Card Edge Connector. The pluggable 2 - piece structure improves productivity and replaceability. *Card Edge Connector sold separately • Supports 12G/6G/3G/HD/SD - SDI • Reduce entire development...
Open the catalog to page 7Small BNC connector incorporates either a cable equalizer or a cable driver. Active BNC makes innovation in your 3G - SDI PC board layout. Form Right Angle Cable Driver Cable Equalizer Cable Driver Cable Equalizer (Right Angle) Impedance of PCB Active BNC < 正面 絶縁体色 > < 底面 ターミナルピンコネクタ色 > Digital Signal Processing Part 50Ω Digital Signal Processing Part 50Ω Simplify Your Circuit Design Space - saving Insulation color white Insulation color black Supply Voltage 5 8 GND SDI+ SDI Vcc SD/HD ENABLE Cable Assemblies GND SDI+ SDI Vcc SD/HD ENABLE Multichannel Systems Panels & Patchbays Output...
Open the catalog to page 8Connectors 75Ω Micro BNC Connectors Website 75Ω Micro BNC Connectors All Canare micro BNC connectors are designed for SMPTE ST 2082 - 1 spec. Ideal for cabling 12G - SDI routers, switchers, and SFP modules. PCB connectors will allow greater flexibilities of the number of video interface. Suitable Cable Canare Others BET - D/H, BET - HBNC, Common Tool Extraction Tools • SMPTE ST 2082 - 1 compliant. • Canare crimp design ensures quick and reliable installation. • Gold plated “snap locks” center pin. • Beryllium copper outer contact. • Come with a position mark on the body for better...
Open the catalog to page 975Ω Micro BNC Connectors Model ■ Tools Suitable Connector Extraction tool Extraction tool DCP - C, HBCP - D series, HBCP - DA series • Extraction tool BET - D/H is available for both Canare Micro BNC and DIN plugs. HBCP - D25HDA with BET - HBNC Technical Trend Return Loss : 20 dB @ 3 GHz, 10 dB @ 12 GHz Nut Driver Bit Right Angle Right Angle, Long type HBCJ - FEMK Edge Mount Fiber - Optic Systems • SMPTE ST 2082 - 1 compliant • Combination of HBCJ - LRK/1 and HBCJ - FEMK offers efficient PCB mount Solution. HBCJ - FEMK HBCJ - FEMK Description Jack to Jack BNC Jack to Micro BNC Jack Panels &...
Open the catalog to page 10All CANARE Electric catalogs and technical brochures
-
Cable Assemblies
14 Pages
-
Multichannel Systems
5 Pages
-
Panels and Patchbays
15 Pages
-
Cables
24 Pages
-
Fiber - Optic Systems
12 Pages
-
IP Connectivity Products
2 Pages