Series K8DV Solenoid valves with fluid separation membrane EN

Product catalog summary

Overview: The K8DV series solenoid valves are designed for applications requiring fluid separation to handle aggressive or heat-sensitive fluids. These valves are compact, lightweight, and offer high flow performance with minimal internal volume, making them suitable for medical and analytical equipment.

Technical Specifications:

Function: 2/2-way Normally Closed (NC)
Operation: Directly operated with fluid separation membrane
Pneumatic Connections: Cartridge for manifold or flanged for subbase
Nominal Diameter: 0.7 mm
Flow Efficiency (kv): 0.1 l/min
Operating Pressure: 0 to 2.1 bar
Operating Temperature: 5 to 50°C
Media: Suitable for liquids and aggressive or inert gases
Response Time: ON ≤ 10 ms, OFF ≤ 15 ms
Installation: Can be installed in any position

Materials:

Body: PEEK
Seals: FKM or EPDM

Electrical Features:

Voltage Options: 24 V DC, 12 V DC, 6 V DC, 5 V DC, 3 V DC, with other voltages available on demand
Voltage Tolerance: ±10%
Power Consumption: 0.6 W
Duty Cycle: ED 100%
Electrical Connection: 2 Pins with 0.5 x 0.5 spacing, 4 mm
Protection Class: IP00

Model Coding: The coding system includes specifications for body type, number of positions, number of ways, seal material, nominal diameter, body material, electrical connection, and voltage-power consumption.

Contact Information: For further details, contact Camozzi Automation S.p.A. at their Brescia, Italy office or via email at [email protected].

Catalog excerpts

Series K8DV Solenoid valves with fluid separation membrane EN-1

SERIES K8DV SOLENOID VALVES WITH FLUID SEPARATION MEMBRANE The K8DV solenoid valve was born to meet all the demands to shut off aggressive or heat sensitive fluids. Thanks to a fluid separation membrane, the fluid is isolated from all internal metal parts of the solenoid valve and avoids heating, even if minimum, generated by the solenoid positioned above. To choose the most suitable model for a specific application, check the chemical compatibility of the medium to control with the available materials of body and seals. 2/2-way - Normally Closed (NC) Very compact design and reduced weight High flow performances Very low internal volume Suitable to be applied in medical equipment and analytical instruments

Open the catalog to page 1

Series K8DV Solenoid valves with fluid separation membrane EN-2

General data TECHNICAL FEATURES Function directly operated with fluid separation membrane Pneumatic connections cartridge for manifold or flanged for subbase Nominal diameter Flow efficient kv (l/min) Operating pressure Operating temperature liquids / aggressive or inert gases MATERIALS IN CONTACT WITH THE MEDIUM Body ELECTRICAL FEATURES Voltage 24 V DC - 12 V DC - 6 V DC - 5 V DC - 3 V DC - other voltages on demand Voltage tolerance Power consumption Duty cycle Electrical connection Protection class Coding example TYPE OF BODY: C = cartridge version 0 = flanged version NUMBER OF POSITIONS: 00...

Open the catalog to page 2

Series K8DV Solenoid valves with fluid separation membrane EN-3

Cartridge version DRAWING LEGEND: 1 = supply 2 = inlet NOTE TO THE TABLE: * to complete the code add VOLTAGE - POWER CONSUMPTION (see the CODING EXAMPLE) Body material Seal material Flanged version DRAWING LEGEND: 1 = supply 2 = inlet NOTE TO THE TABLE: * to complete the code add VOLTAGE - POWER CONSUMPTION (see the CODING EXAMPLE) Body material Seal material

Open the catalog to page 3

Series K8DV Solenoid valves with fluid separation membrane EN-4

Contacts [email protected] For further information about our products and conditions of sale, please contact the Camozzi Fluid Control department at: Camozzi Automation S.p.A. Società Unipersonale Via Eritrea, 20/I 25126 Brescia Italy Tel. +39 030 37921 Customer Service Tel. +39 030 3792790 [email protected] Export Department Tel. +39 030 3792262 [email protected] A Camozzi Group Company

Open the catalog to page 4