SERIES DB FLUID MULTICHANNEL MANIFOLD

SERIES DB MODULAR DESIGN ASSEMBLY ACETAL RESIN USED FOR MANIFOLD AND VALVE BODY IS APPROVED BY THE WRAS/KTW AND FDA/NFS STANDARDS EASY MODULAR ASSEMBLY SYSTEM MULTIPLE COMBINATION OPTIONS FOR FULL CUSTOMISATION ONLY STAINLESS STEEL PARTS CONTACT THE FLUIDS* The Series DB is a modular and compact solution, Each single manifold can support several optimising pneumatic, hydraulic and electrical configurations and can easily be tailored to suit connections — reducing installation times on machines the operating requirements of varied applications. operating in the industrial and life sciences sectors....

Series DB / Fluid multichannel Manifold Configuration examples Manifold configuration with only one 2/2 N.C. valve for Manifold configuration with three 2/2 N.C. valves for Manifold configuration with one proportional valve for gases and two 2/2 N.C. valves for Configuration flexibility Compact and light design

Designed to be flexible Modularity Plugs for valve positions The manifolds can be quickly and simply assembled “Closed version” plug “Open version”

Series DB / Fluid multichannel Manifold Integrated flow regulators SHORT LONG Fixing holes N° 2 blind holes for screws Ø3 mm for plastic - “Short” flow regulator for factory settings. - “Long” flow regulators accessible to the user. Connections for external flow regulators Hose barb fittings in 303 stainless steel material suitable for I.D. tubing Ø 1.6 mm Flow direction The standard direction of flow is from the lateral port to the frontal ports. It is possible to configure the manifold in order to reverse the direction of flow Integrated flow regulators Located on the bottom and on the front...

General data TECHNICAL FEATURES Valve function direct acting poppet type Pneumatic connection hose barb fittings for I.D. tubing Ø 1.6 - 3 - 4 mm / M5 threaded Valve orifice diameter Flow coefficient kv (l/min) Nominal flow (air @ 6 bar free flow) Operating pressure Operating temperature filtered air class 5.4.4 according to ISO 8573-1, inert gas, potable water filtered air class 5.4.4 according to ISO 8573-1, inert gas MATERIAL IN CONTACT WITH THE MEDIUM Manifold and valve body Internal valve parts IXEF - stainless steel 303 - 430 brass - stainless steel 303 - 430 ELECTRICAL FEATURES Voltage...

Series DB / Fluid multichannel Manifold SERIES SECTION A - VALVE POSITION 0 = plug element 1 = bypass element 2 = valve 2/2 NC - Ø 1.6 mm - rear electrical contacts 3 = valve 2/2 NC - Ø 1.6 mm - front electrical contacts 6 = valve 2/2 PROPORTIONAL - Ø 1.6 mm - rear electrical contacts 7 = valve 2/2 PROPORTIONAL - Ø 1.6 mm - front electrical contacts A = valve 2/2 PROPORTIONAL - Ø 2.0 mm - rear electrical contacts B = valve 2/2 PROPORTIONAL - Ø 2.0 mm - front electrical contacts SECTION A - OUTPUT PORT POSITION 0 = none 1 = plug fitting 2 = hose barb fitting for tubing Ø 1.6 x 3.17 mm 3 = hose...

Camozzi Automation S.p.A. Società Unipersonale Via Eritrea, 20/I 25126 Brescia Italy Tel. +39 030 37921 [email protected] Customer Service Tel. +39 030 3792790 [email protected] Export Department Tel. +39 030 3792262 [email protected] A Camozzi Group Company