Catalogs >
CAMOZZI AUTOMATION >
Series 6000 Fittings and accessories for misting systems EN

Series 6000 Fittings and accessories for misting systems EN
12Pages

Add to favorites

Catalog excerpts

Series 6000 Fittings and accessories for misting systems EN - 1

SERIES 6000M FITTINGS AND ACCESSORIES FOR MISTING SYSTEMS

Open the catalog to page 1

Series 6000 Fittings and accessories for misting systems EN - 2

SERIES 6000M MISTING SYSTEMS The range of Series 6000M fittings has been designed for misting systems. Thanks to its very robust design, it guarantees Tenuta affidabile BENEFITS Tenuta affidabile a tight connection even at very high pressures. The versatility of these fittings and their easy installation allow them to be used in a large number of applications, for example for cooling in both indoor and outdoor environments, Reliable tightening Tenuta affidabile Design robusto Tenuta affidabile Design robusto dust removal and in a wide variety of industrial and agricultural production...

Open the catalog to page 2

Series 6000 Fittings and accessories for misting systems EN - 3

Series 6000M / Fittings and accessories for misting systems Designed for numerous applications Indoor / Outdoor cooling Humidity management (humidification) Fire protection Dust suppression Odour control Mosquito and insect control

Open the catalog to page 3

Series 6000 Fittings and accessories for misting systems EN - 4

Series 6000M fittings for misting systems External tube diameters: 1/4, 3/8, 1/2 inch Fitting threads: 1/4, 3/8, 1/2 NPTF; 12/24 UNC; 10/24 UNC; 9/16-24 UNEF Series 6000M fittings have been designed and produced to meet the specific requirements of the misting sector. This new range takes origin from the already existing Series 6000, which has been changed and enriched with new accessories. The push-in fittings system ensures maximum tightening even at very high working pressures. General data Materials body and collet: nickel-plated brass O-ring: NBR Connection tube Rilsan® polyamide 11...

Open the catalog to page 4

Series 6000 Fittings and accessories for misting systems EN - 5

Series 6000M / Fittings and accessories for misting systems Installation procedures Connection of the tube 1. Cut the tube perpendicularly to its axis. We recommend to use Camozzi tube cutters Mod. PNZ-12 or PNPZ-12. 2. Insert the tube into the connector. Push it to the bottom of the internal surface of the connector. 3. Disconnect the tube. Pull the collet towards the connector as shown by the arrows (Pic. 1), then the tube can be disconnected (Pic. 2). If you have difficulty, you can use the tube disconnecting set Mod. SP. Pic. 1 WARNING The tube should be clean and free from chips, cuts,...

Open the catalog to page 5

Series 6000 Fittings and accessories for misting systems EN - 6

Fittings Mod. M6550 Union Elbow Fittings Mod. M6580 Union Straight

Open the catalog to page 6

Series 6000 Fittings and accessories for misting systems EN - 7

Series 6000M / Fittings and accessories for misting systems Fittings Mod. M6510 NPTF Male Straight Fittings Mod. M6103 45° Elbow Adaptor Fittings Mod. M6953 Straight Adaptor

Open the catalog to page 7

Series 6000 Fittings and accessories for misting systems EN - 8

Fittings Mod. M6580 06...S0... Union Straight with hole for nozzle Fittings Mod. M6540 04...S01 Union Tee Adaptor Fittings Mod. M6540 04...S02 Union Straight with hole for nozzle

Open the catalog to page 8

Series 6000 Fittings and accessories for misting systems EN - 9

Series 6000M / Fittings and accessories for misting systems Fittings Mod. M6900 Male Plug Fittings Mod. M6750 Female Plug

Open the catalog to page 9

Series 6000 Fittings and accessories for misting systems EN - 10

Fittings Mod. M2103 45° threaded Elbow Fittings Mod. M2532 Plug Hole Fittings Mod. M2033 Female Cross

Open the catalog to page 10

Series 6000 Fittings and accessories for misting systems EN - 11

Series 6000M / Fittings and accessories for misting systems Accessories Tubes in polyamide PA11 Rilsan® Mod. TRSR Colour: black Tubes in polyamide PA12 Mod. TSR Colour: black Tubes cutters Mod. PNZ and PNZP Replacement blades of Mod. PNZ can be ordered separately Tubes cutter Mod. PNZP is in plastic able to cut tubes with Ø till to 12 mm able to cut tubes with Ø till to 12 mm Disconnecting tube set Mod. SP The set includes keys to disconnect tubes with diameters between 5/32” and 1/2”.

Open the catalog to page 11

Series 6000 Fittings and accessories for misting systems EN - 12

Camozzi Automation S.p.A. Società Unipersonale Via Eritrea, 20/I 25126 Brescia Italy Tel. +39 030 37921 info@camozzi.com Customer Service Tel. +39 030 3792790 service@camozzi.com Export Department Tel. +39 030 3792262 sales@camozzi.com A Camozzi Group Company

Open the catalog to page 12