PNEUMATIC ACTUATION

WELCOME TO CAMOZZI AUTOMATION Contacts Camozzi Automation S.p.A. Società Unipersonale Via Eritrea, 20/I 25126 Brescia Italy Tel. +39 030 37921 www.camozzi.com Customer Service Tel. +39 030 3792790 [email protected] Export Department Tel. +39 030 3792253 [email protected] Camozzi Automation is a global leader in the design and production of motion and fluid control components, systems and technologies for Industrial automation, Transportation and Life science industries.

International standard cylinders Compact cylinders Stainless steel cylinders Guided cylinders Cylinders not according standards Rotary cylinders Rodless cylinders Proximity switches Hydrochecks, Rod lock, Shock absorbers Electromechanical cylinders Electromechanical axes Drives Motors and gearboxes 6 Fieldbus and multipole systems 1 2 Valve islands Multi-serial modules Proportional valves Proportional regulators Suction pads Ejectors Vacuum accessories Vacuum filters 5 Valves and solenoid valves 1 Direct and indirect acting 2/2, 3/2 solenoid valves 2 Solenoid, pneumatic and manifold valves 3...

INTRODUCTION > GENERAL INDEX General index 1 International standard cylinders Series 41 Cylinders - Aluminium profile GENERAL INDEX Series QN Short-stroke cylinders Series QP, QPR Short-stroke cylinders Series QL Short-stroke cylinders Series RPA Short stroke cylinders with non-rotating rod Series 63 END LOCK Cylinders Series 31 Compact cylinders Series 61 Cylinders - Aluminium profile Series 31 Compact cylinders, Tandem and Multi-position versions Series 6PF Positioning Feedback cylinders Series ST Stopper cylinders Series 32 Compact magnetic cylinders Series 32 Compact cylinders, Tandem and...

INTRODUCTION > GENERAL INDEX 7 Rodless cylinders Section Series QC Cylinders with integrated guide Series QCTF, QCBF Cylinders with integrated guide Series QX Twin cylinders Series 50 Rodless cylinders Series 52 Rodless cylinders Series CST - CSV - CSH CSB - CSC - CSD - CSG Magnetic proximity switches 8 Proximity switches New models 5 Cylinders not according standards Section Series 14 Compact mini-cylinders Series CSN Proximity switches Series 27 Roundline cylinders 9 Hydrochecks, Rod lock, Shock absorbers Section Series 43 Hydrochecks Section Series 69 Rotary cylinders Series 30 Rotary cylinders...

INTERNATIONAL STANDARD CYLINDERS > SERIES 16, 23, 24 AND 25 MINI-CYLINDERS Series 16, 23, 24 and 25 mini-cylinders Series 16: ø 8, 10, 12 mm - non-magnetic Series 23: ø 16, 20, 25 mm - magnetic, auto-cushioned Series 24: ø 16, 20, 25 mm - magnetic Series 25: ø 16, 20, 25 mm - magnetic, cushioned »» Single and double-acting »» In compliance with ISO 6432 »» Stainless steel rod and barrel »» Anodized aluminium end-blocks »» Cushioning types: mechanical with bumper, pneumatic auto-cushioning, adjustable pneumatic cushioning Series 16, 23, 24 and 25 mini-cylinders are designed according to ISO 6432....

INTERNATIONAL STANDARD CYLINDERS > SERIES 16, 23, 24 AND 25 MINI-CYLINDERS STANDARD STROKES FOR MINICYLINDERS ■ = Double-acting ✖ = Single-acting CODING EXAMPLE MATERIALS A = rolled stainless steel AISI 303 rod, stainless steel AISI 304 tube, anodized AL end-blocks CONSTRUCTION A = Nose nut Mod. V + Piston rod lock nut Mod. U RL = cylinder with rod lock (only for Ø20 - Ø25) SERIES 16 = non magnetic, with mechanical cushioning 23 = magnetic, auto-cushioning 24 = magnetic, with mechanical cushioning 25 = magnetic, adjustable cushioning OPERATION 1 = single-acting, front spring, no cushion (only...

INTERNATIONAL STANDARD CYLINDERS > SERIES 16, 23, 24 AND 25 MINI-CYLINDERS ACCESSORIES FOR MINICYLINDERS SERIES 16 - 23 - 24 - 25 Front/rear flange mount Mod. E Rear trunnion bracket Mod. I Swivel ball joint Mod. GA Piston rod socket joint Mod. GY All accessories are supplied separately, except for piston rod lock nut Mod. U and nose nut Mod. V SERIES 23: APPLICABLE MASS ACCORDING TO THE CYLINDER’S SPEED CHOICE OF THE CYLINDER 1) Choose the right size according to the force needed in the application

 2) Check on the graph if the working conditions, mass and speed intersect at a point below the...

INTERNATIONAL STANDARD CYLINDERS > SERIES 16, 23, 24 AND 25 MINI-CYLINDERS DIMENSIONS Series D3 front/rear cushion stroke Series 16, 23, 24 and 25 mini-cylinders with through-rod + = add the stroke once ++ = add the stroke twice DIMENSIONS Series front/rear cushion stroke Products designed for industrial applications. General terms and conditions for sale are available on www.camozzi.com.

INTERNATIONAL STANDARD CYLINDERS > SERIES 16, 23, 24 AND 25 MINI-CYLINDERS Series 23 - 24 - 25 mini-cylinders with rod lock (Mod. RLC) DIMENSIONS Series Products designed for industrial applications. General terms and conditions for sale are available on www.camozzi.com.

INTERNATIONAL STANDARD CYLINDERS > SERIES 16, 23, 24 AND 25 MINI-CYLINDERS Feet and nose nut material: zinc-plated steel. Supplied with: 2x feet 1x nose nut mod. V + = add the stroke Front/rear flange mount Mod. E Material: zinc-plated steel. Products designed for industrial applications. General terms and conditions for sale are available on www.camozzi.com.

INTERNATIONAL STANDARD CYLINDERS > SERIES 16, 23, 24 AND 25 MINI-CYLINDERS Rear trunnion bracket Mod. I Supplied with: 1x zinc-plated steel rear trunnion 1x stainless steel clevis pin 2x steel Seeger Rod fork end Mod. G ISO 8140 Material: zinc-plated steel. Swivel ball joint Mod. GA ISO 8139 Material: zinc-plated steel. Products designed for industrial applications. General terms and conditions for sale are available on www.cam

INTERNATIONAL STANDARD CYLINDERS > SERIES 16, 23, 24 AND 25 MINI-CYLINDERS Piston rod socket joint Mod. GY Piston rod lock nut Mod. U ISO 4035 Material: zinc-plated steel. Nose nut Mod.V ISO 4035 V-8-10 / V-20-25 not according standard. Material: zinc-plated steel Products designed for industrial applications. General terms and conditions for sale are available on www.camozzi.com. ISO 8139 Material: zama and zinc-plated st