HANDLING SOLUTIONS Grippers and vacuum components to improve your industrial processes

RELIABILITY AND FLEXIBILITY IN A COMPACT DESIGN Modern industrial processes in which an ever-increasing amount of automation is required, handling is of essential importance to increase the productivity Grippers, tool changer and vacuum components are available in a range of different versions demands in terms of miniaturisation, reliability, flexibility and adaptability. Our wide range of handling solutions will provide the best solution for every application sector, from material handling and assembly to robotics and machine tool loading and unloading up to the most complex mechatronic application...

Overview / Handling solutions PICK & HOLD Conceived for any application PALLETTIZZAZIONE PICK & PLACE CARICO E SCARICO MACCHINA SORTING CARICO E SCARICO MACCHINA CARICO E SCARICO MACCHINA Machine Tending PICK & HOLD TESTING, COLLAUDO SORTING E CONTROLLO QUALITA’ Testing and Quality Control PICK & HOLD PICK & HOLD TRASFERIMENTO CARICO E SCARICO MACCHINA PALLETTIZZAZIONE PICK & PLACE Pick & Place PICK & PLACE CARICO E SCARICO MACCHINA PICK & PLACE CARICO E SCARICO MACCHINA PICK & HOLD FEEDING PICK & HOLD SORTING TESTING, COLLAUDO E CONTROLLO QUALITA’ TESTING, COLLAUDO E CONTROLLO QUALITA’ PICK...

PNEUMATIC GRIPPERS AH grippers are optimised in terms of weight and dimensions, to facilitate the connection to different handling systems, from gantry to anthropomorphic and collaborative robots. Long stroke parallel grippers with sliding guide Long stroke parallel grippers with ball guide Parallel grippers with T-guide Series CGPT Total force: Stroke per jaw: Version: Stroke per jaw: 4 * 40 mm Version: Double acting Stroke per jaw: 2,5 * 25 mm Versions: Single and double acting ■ Robust and compact design ■ High opening/closing repeatability ■ High resistance to external loads ■ Compact and...

Overview / Handling solutions Parallel grippers with H-shaped guide Series CGPM Compact, parallel grippers with T-guide Parallel grippers with double ball bearing guide Stroke per jaw: 2 * 6 mm Version: Single and double acting Stroke per jaw: 2,65 * 20,5 mm Versions: Single and double acting Stroke per jaw: 2 * 10 mm Versions: Single and double acting ■ Compact and light design ■ Compatible with magnetic proximity switches or inductive sensor kits ■ Protected from penetration by impurities ■ Robust, compact and light design ■ High closing/opening repeatability ■ Protected from penetration by...

PNEUMATIC GRIPPERS Wide opening parallel grippers Radial grippers 180° opening Angular grippers with opening angle of 30° Series CGAN Stroke per jaw: 10 * 80 mm Version: Double acting Total torque: Jaw opening: Version: Double acting Total torque: 10,5 * 292 N Jaw opening: 2x15 Version: Double acting BENEFITS ■ Robust and light design ■ Highly flexible mounting ■ Wide range of strokes available ■ Precision and position repeatability ■ High speed opening and closing ■ Protected from penetration by impurities ■ Compact and light design ■ Highly flexible mounting ■ High speed opening and closing...

Overview / Handling solutions Three-jaw grippers with T-guide Three-jaw grippers with T-guide Sprue grippers Series RPGA and RPGB Stroke per jaw: 2,5 * 16 mm Versions: Single and double acting Stroke per jaw: 4 * 13 mm Version: Double acting Versions: Not self-centering, single acting, normally open Models: Flat finger, curved finger, short finger, flat finger with sensor slot, curved finger with sensor slot ■ High resistance to external static and dynamic loads ■ High closing/opening repeatability ■ Protected from penetration by impurities ■ Compact and light design ■ Highly flexible mounting...

PNEUMATIC GRIPPERS FOR COLLABORATIVE ROBOTS Collaborative grippers provide a safe, intelligent and versatile solution for handling operations in advanced robotics. Their compact design, integrated functionalities and precise control ensure operational efficiency, ease of use and flexibility for many industrial applications. Collaborative parallel gripper Smart collaborative parallel gripper Maximum closing force at 6 bar: 94 N (NC) Maximum opening force at 6 bar: 107 N (NO) Stroke per jaw: 6 mm Maximum force at 6 bar: 165 N Stroke per jaw: 40 mm Communication protocol: Modbus RTU (RS-485) ■ Compliant...

Overview / Handling solutions TOOL CHANGER The Tool Changer is the ideal solution for industrial applications that require an efficient and reliable device for a fast and secure changeover of tools (gripping or working systems). BENEFITS · High flexibility and adaptability · Constant monitoring of block position · Increased efficiency and precision · High load capacity · Reduced downtime

This range of vacuum components allows the creation of complete solutions for handling, both of single objects - typically for the electronics and assembly industries - and of large workpieces, such as wooden panels or metal sheets. Suction pads for the packaging Series VPCL, VPCM, VPCN, VPCO, VPCQ, VPCF, VPOL Suction PadsUniversal suction padsSeries VTCF, VTOF, VTCL, VTCN, VSCF Materials: NBR, Silicone Shape: Round, oval Version: Flat, bellows (1,5 - 2,5 folds) APPLICATIONS ■ Smooth or slightly contoured surfaces (glass, wood, plastic, sheet metal) ■ Fast handling with high stability ■ Silicone...

Overview / Handling solutions Basic ejectors Inline ejectors Compact ejectors BENEFITS ■ Compact, without moving parts (Venturi type) ■ Anodized aluminium body (VEBL) or technopolymer body (VEB) ■ Ideal for: assembly, robotics, woodworking and food industry BENEFITS ■ Direct mounting on suction pad ■ Anodized aluminium body (VED) or technopolymer body (VEDL) ■ Ideal for: electronics, food industry and dynamic applications BENEFITS ■ Modular and compact, with integrated valves and sensors for suction, blow-off and control ■ Versions available with I/O-Link interface ■ High energy efficiency ■...