PUSH-IN FITTINGS

THE LATEST GENERATION OF PUSH-IN FITTINGS STAINLESS STEEL GRIPPING RING FAST CONNECTION AND DISCONNECTION FULL FLOW Designed for optimal fluid flow to provide better efficiency The GRIPfit is the latest generation of push-in fittings developed to cover and satisfy the needs of various applications: from industrial automation to Life Science, from water treatment and beverages up to fluidic systems and power packs. Easy to connect and disconnect Made with high-performance materials, this new range of fittings is equipped with a flexible stainless steel gripping ring to facilitate the connection...

GRIPf/f / Push-in Fittings INDUSTRIAL AUTOMATION Nickel-plated brass Button: Technopolymer (PA66) Gripping ring: Stainless steel (AISI 301) Seal: NBR Threads: Nickel-plated brass Media: Compressed air and vacuum Chemical nickel-plated brass Button: Technopolymer (PA66) Gripping ring: Stainless steel (AISI 301) Seal: EPDM Threads: Chemical nickel-plated brass Media: Industrial water and cooling fluids Low lead brass (CW510L) Button: Technopolymer (PA66) Gripping ring: Stainless steel (AISI 301) Seal: EPDM Threads: Low lead brass (CW510L) Media: Tap and drinking water, LIFE SCIENCE Chemical nickel-plated...

Camozzi Automation PUSH-IN FITTINGS Series 7000 Automation push-in fittings are made of reinforced technopolymer to meet the new market demands for reliability, ease of use and efficient solutions. Their compact dimensions and lightweight make this new range of fittings ideal for most pneumatic applications associated with optimum gripping and sealing technologies. Maximum flow Compact and lightweight I GENERAL DATA Maximum operating pressure -20° / +40° 16 bar 16 bar 16 bar 16 bar 16 bar 16 bar Minimum operating pressure -0,9 bar Operating temperature Threads Connecting tube Media -20 + +80...

GRIPf/f / Push-in Fittings Male straight connector Nickel-plated brass BSPT ISO-7 (with pre-applied PTFE sealant) Male straight connector Nickel-plated brass metric parallel ISO-965 and BSPP ISO-228 Male straight connector Nickel-plated brass metric parallel ISO-965 and BSPP ISO-228 Female straight connector Nickel-plated brass metric parallel ISO-965 and BSPP ISO-228 Male straight adapter Nickel-plated brass metric parallel ISO-965 and BSPP ISO-228 Swivel female elbow BSPP ISO-228 Swivel male elbow BSPT ISO-7 (with pre-applied PTFE sealant) Swivel male elbow metric parallel ISO-965 and BSPP...

Camozzi Automation Swivel male long elbow metric parallel ISO-965 and BSPP ISO-228 Ø 10 Swivel male lateral tee BSPT ISO-7 (with pre-applied PTFE sealant) Ø 4 6 6 8 8 Swivel male central tee metric parallel ISO-965 and BSPP ISO-228 Swivel male Y BSPP ISO-228 Ø 10 10

GRIPf/f / Push-in Fittings Swivel male single banjo metric parallel ISO-965 and BSPP ISO-228 Swivel male Y banjo BSPP ISO-228 * brass body Male double single banjo adjustable BSPP ISO-228 Male triple single banjo adjustable BSPP ISO-228 Male double Y banjo adjustable BSPP ISO-228 Male triple Y banjo adjustable BSPP ISO-228 To be assembled with Mod. 7632 02, 7632 03 Single banjo body To be assembled with Mod. 7632 02, 7632 03 Y banjo body

Camozzi Automation To be assembled with Mod. G7610, G7640 Double stem for banjo body To be assembled with Mod. G7610, G7640 Triple stem for banjo body Equal and reducer junction elbow Reducer junction straight Bulkhead connector Nickel-plated brass metric parallel ISO-965

GRIPf/f / Push-in Fittings Equal and reducer intermediate straight | Fittings Mod. G7550 Equal and reducer intermediate elbow Equal and reducer intermediate tee | Fittings Mod. G7545 Reducer intermediate multiple tee Equal and reducer intermediate Y Equal and reducer intermediate double Y Plastic male plug | Fittings Mod. G6750 Female plug Nickel-plated brass | Fittings Mod. 7950 Plastic Junction

Camozzi Automation PUSH-IN FITTINGS Series 7000 Cooling push-in fittings have been designed with a special technopolymer based on bio-sourced renewable raw materials that allow the component to resist water absorption, temperature variations and liquid cooling additives. Resistant to water pressure and erosion RoHS Resistant to corrosion I GENERAL DATA Maximum operating pressure -20° / +40° 16 bar 16 bar 16 bar 16 bar 16 bar Minimum operating pressure Operating temperature Threads Connecting tube Media - 20 r + 100 (See characteristics of tubes used) Polyurethane (PU), Polyethylene (PE), Polyamide...

GRIPfit / Push-in Fittings Female straight connector Chemical nickel-plated brass BSPP ISO-228 Ø 10 10 10 12 12 16 16 Fittings Mod. W7540 Equal intermediate tee Equal intermediate straight Ø 6 8 Equal junction elbow Reducer junction straight Swivel male elbow BSPP ISO-228 Male straight adapter Chemical nickel-plated brass BSPP ISO-228 Female plug Chemical nickel-plated brass Mod. W6750 6 W6750 8 Equal intermediate elbow Ø 10 12 16 Fittings Mod. W7545 Reducer intermediate multiple tee Mod. W7545 8-6 Fittings Mod. W7560 Equal intermediate Y Mod. W7560 6 W7560 8 Accessory Mod. 6900 (see page 09)...

Camozzi Automation PUSH-IN FITTINGS Series 7000 Beverage and Water filtration is a new range of push-in fittings made of reinforced bio-sourced technopolymer and low lead brass. Thanks to the materials and new connection technology, these fittings are ideal for beverage dispensing and water filtration systems. Reach RoHS Bio-sourced materials (Composite) DM174 Drinking Water Easy connection and disconnection Regulation (CE) n. 2023/2006 21 CFR compliance *Check the NSF certified models here: https://www.nsf.org/certified-products-systems ** NSF169 and NSF61 currently available for brass straight...

GRIPfit / Push-in Fittings Equal junction elbow Fittings Mod. B7550 Equal intermediate elbow Fittings Mod. B7560 Equal intermediate Y Fittings Mod. B7800 Reducer junction straight Fittings Mod. B7580 Equal intermediate straight Fittings Mod. B7540 Equal intermediate tee Accessory Mod. B6900 Plastic male plug

Camozzi Automation PUSH-IN FITTINGS Series 7000 Medical push-in fittings are designed for the Life Science market, particularly for medical and analytical applications. These fittings are mainly made from bio-based materials and are compatible with most medical gases and fluids. Excellent chemical resistance Maximum operating pressure -20° / +40° 16 bar 16 bar 16 bar 16 bar Minimum operating pressure -0,9 bar Operating temperature Threads Connecting tube Media - 20 r + 100 (See characteristics of tubes used) GAS cylindrical ISO-228 BSPP ISO-965 Metric parallel Fluoropolymer (FEP), rigid metal...