AIR BRAKE FITTINGS SERIES 9000 Brake safely with our fittings

Camozzi Automation Being one of our three strategic business sectors, Camozzi Automation offers the Transportation industries a wide range of products. These products are ready for use in the harshest conditions, are reliable and efficient, in order to keep you moving. In close cooperation with our customers and partners, we develop and produce standard products and customised solutions, always focussing on three main targets: high performance, smart design and excellent quality. Developing products that can operate under extreme temperatures, in dirty or corrosive environments and tolerant of...

TRUCK & TRAILER Our offering starts from fittings for multiple fluids like air, fuel, water, oil or grease and extends over PASSENGER CAR & LIGHT DUTY CV a wide range of control valves for gases & fluids, to pneumatic and electric actuators, filters, regulators and other complementary products. This comprehensive range makes us the right partner for your project. Connection or Actuation, On/Off or Proportional, Analogue or CAN-BUS, IATF 16949 or IRIS, we talk your language.

Camozzi Automation General index Straight connectors Shaped swivel connectors Page GENERAL INDEX Page Mod. 9512 Straight fittings Mod. D2993 Bulkhead swivel studs Mod. 9919 Bulkhead swivel connectors Mod. 9463 Straight fittings with female thread Mod. 9520 Swivel Elbow fittings Mod. 9590 Bulkhead connectors Mod. 9590 with 24° cone Mod. 9430 Swivel Branch Tee fittings Mod. D2220 Swivel Elbow adaptors Mod. D2260 Swivel Branch Tee adaptors Shaped non-swivel connectors Page Mod. 9555 Plug-In Elbow connector Inline connectors Page General terms and conditions for sale are available on www.camozzi.com....

Adaptors & Valves Page Mod. VPC2 Test point valve Mod. VPC2 Bulkhead with test point & tube connection Mod. V604 Tyre inflator valve Mod. PNZ and PNPZ Tube cutter tool Accessories Page Assortment boxes / Repair Kits Page TRUCK-DCASE/6000 Repair kit with Series 6000 fittings TRUCK-DCASE/9000 Repair kit with Series 9000 fittings TRUCK-DCASE/9000+6000 Repair kit with Series 9000 and Series 6000 fittings General terms and conditions for sale are available on www.camozzi.com. This document contains a brief description of the products offered by Camozzi Automation at the time of publication. For more...

Series 9000 Air Brake Fittings Series 9000 fittings have been designed to connect tubing according to DIN 74324 or ISO 7628 in the pneumatic brake systems of commercial vehicles. They offer excellent reliability and ease of assembly. The range includes a very compact release tool for disconnecting tubes from the fittings. The Series 9000 offers a smart portfolio of different types of connectors. Depending on the demands of our customers, we are also ready to provide customized solutions. Series 9000 fittings are TÜV certified and produced according to IATF 16949:2016 standards. The tube interface...

Assembly and removal of the tube SERIES 9000 To guarantee a correct, safe and tight connection, it is necessary to cut the tube correctly. The cutting angle should not exceed 5° (Picture A), and we recommend using a suitable tube cutting tool, (Refer to PNZ in this catalogue). The outer surface of the tube should be smooth and free from any kind of damage or dirt (Picture B). When inserting the tube, make sure to push it into the fitting, down to the tube stop (Picture C). The correct insertion length is specified for every tube size/fitting and can be found in the table to the right (Assembly...

Straight connectors SERIES 9000 Shaped swivel connectors Shaped non-swivel connectors Stainless Steel Biodegradable Composite General terms and conditions for sale are available on www.camozzi.com. This document contains a brief description of the products offered by Camozzi Automation at the time of publication. For more complete and up-to-date information about the Camozzi Automation product range, please refer to our online catalogue at http://catalogue.camozzi.com/.

Assembly of shaped Non-Swivel Connectors To ensure a tight and secure connection between the fitting and the threaded port of the component in the pneumatic system, please install following this procedure: 1. Screw the nut upwards until you reach the mechanical stop (do not tighten the nut against the stop with a tool, simply position the nut by hand, as shown in the picture). 2. Screw the fitting into the threaded port until the O-ring seal touches the surface of the port. This can be done by hand or using a tool. We recommend you do this by hand to maintain feel and identify once the correct...

For Swivel Connectors, please install manually according to the following instructions. Attention: Swivel connectors must not be used in applications with relative movement (e.g. connections between truck & trailer or between axle and chassis). 1. Mount the stud onto the port (please refer to the maximum torque forces on the previous pages). We recommend removing the cap just before you mount the female part to the stud in order to prevent dirt on or damage to the O-rings. 2. Position the female part on the stud. If you want to use an anti-rotation lock, attach this to the female part before...

For the assembly of our inline barb connectors, we recommend using a suitable tool set. 1. Choose the appropriate tool insert for the fitting and plug it onto the tool. 2. Choose the right clamping fixture for your tube size. Position and clamp the tube. 3. Slide the fitting, with the S9000 tube interface end on to the insert. The barb end directs towards the clamped tube (Picture 1). SERIES 9000 4. Slowly close the tool until the barb end of the fitting touches the tube. 5. Make sure barb and tube bore are well centred before pressing the barb end into the tube (Picture 2). 6. Press the fitting...

Application examples Example 1: Mod. 9592 Bulkhead connector for mounting of a gladhand on a bracket Example 2: Mod. 9555 Plug-In elbow connector on backside of a test point panel Example 3: Mod. 9919 Bulkhead swivel connector with t-adaptor, testpoint and straight connector Example 4: Mod. D2593 Bulkhead reducer with straight connector for external drain valve position General terms and conditions for sale are available on www.camozzi.com. This document contains a brief description of the products offered by Camozzi Automation at the time of publication. For more complete and up-to-date information...