Technical datasheet PFG09ZATF

Product catalog summary

Specifications:
Model: PFG09/Z/AT
Weight: 1.2 kg
Power Supply Options: Bivoltage 115/230V (50-60Hz) - 4W, Bivoltage 24/48V (50-60Hz) - 4W, DC 24V ±15% - 4W
Signal: SPDT / max. 5A-250VAC
IP Grade: IP65
Housing: Aluminium (powder coated)
Connection: Inox - AISI304
Ambient Temperature: -20°C to +70°C
Process Temperature: -20°C to +200°C
Pressure Range: +0.8 to +1.1 bar
Directives: 2011/65/EU (RoHS), 2014/30/EU (EMC), 2014/34/EU (ATEX), 2014/35/EU (LVD)
Ex Marking: Ex II 1/2 D Ex ta/tb IIIC T85°C IP65 Da/Db, Ex II 1/2 G Ex d IIB T6 Ga/Gb

Procedures:
Terminals: Male FASTON (.250 series / 6.3x0.8 mm)
Extensions: Available in lengths from 250mm to 1500mm, and up to 12m on request
Paddles: Various dimensions and configurations available

Standards:
General Tolerance: ISO 2768-mH
Drawing from CAD System: Refer to 3D model for missing dimensions, no manual modification allowed

Recommendations:
Spring Terminal Block: No tool needed for wire connection, suitable for 0.13 - 2.5mm² (AWG26 - AWG14)
Screw Terminal Block: Flat head design, suitable for 0.05 - 2.5mm² (AWG30 - AWG12)
4rpm Gearmotor: Increases paddle speed to reduce product detection delay time (response time ~ 1.5s)

Catalog excerpts

POWER SUPPLY POWER SUPPLY POWER SUPPLY Terminals : male FASTON (.250 series / 6,3x0,8 mm) Signal SPDT / max. 5[A]-250VAC IP grade IP65 Housing Aluminium (powder coated) Connection Inox - AISI304 Ambient temperature -20 < Ta < +70 [°C] Process temperature -20 < Tp < +200 [°C] Pressure range +0,8 ... +1,1 bar 2011/65/EU (RoHS) Directives Via dell'Industria 12 42025 Cavriago (RE) - ITALY www.camlogic.it Ex II 1/2 D Ex ta/tb IIIC T85°C IP65 Da/Db UNLESS OTHERWISE SPECIFIED DIMENSION ARE IN [mm] DRAWING FROM CAD SYSTEM - REFER TO 3D MODEL FOR MISSING DIMENSION - NO MANUAL MODIFICATION ALLOWED

Open the catalog to page 1

Flexible extension PF : galvanized steel 6 Extension with external protection PA : stainless steel 1300 1350 1400 1450 1500 other lengths available on request, up to 1,5m Via dell'Industria 12 42025 Cavriago (RE) - ITALY www.camlogic.it UNLESS OTHERWISE SPECIFIED DIMENSION ARE IN [mm] DRAWING FROM CAD SYSTEM - REFER TO 3D MODEL FOR MISSING DIMENSION - NO MANUAL MODIFICATION ALLOWED NOTE : lenghts may slightly differ from the tables according to the type of connection, model type and paddle chosen

Open the catalog to page 2

AC4 INOX AISI 304 density > 0.5 kg/dm3 AC5L INOX AISI 304 density > 0.2 kg/dm3 AC6 INOX AISI 304 density > 0.1 kg/dm3 AC7 INOX AISI 304 density > 0.3 kg/dm3 AC3 INOX AISI 304 density > 0.3 kg/dm3 AC1 INOX AISI 304 density > 1.0 kg/dm3 AC9 INOX AISI 304 density > 0.2 kg/dm3 AC10 INOX AISI 304 density > 0.6 kg/dm3 AC12 INOX AISI 304 density > 0.4 kg/dm3 AC11 INOX AISI 304 density > 0.1 kg/dm3 AC14 INOX AISI 304 density > 0.4 kg/dm3 AC8 galvanized steel (wires) density > 2.0 kg/dm3 AC16 INOX AISI 304 density > 0.3 kg/dm3 AC18 INOX AISI 304 density > 0.7 kg/dm3 AC17 INOX AISI 304 density > 0.4 kg/dm3...

Open the catalog to page 3

SCREW TERMINAL BLOCK Terminals with screw terminal design (flat head) 0,05 - 2,5mm2 (AWG30 - AWG12) SPRING TERMINAL BLOCK Terminals with spring terminal design. No tool needed for wires connection. 0,13 - 2,5mm2 (AWG26 - AWG14) Increase paddle speed (4 rpm) to reduce product detection delay time (response time ~ 1,5s) Via dell'Industria 12 42025 Cavriago (RE) - ITALY www.camlogic.it UNLESS OTHERWISE SPECIFIED DIMENSION ARE IN [mm] DRAWING FROM CAD SYSTEM - REFER TO 3D MODEL FOR MISSING DIMENSION - NO MANUAL MODIFICATION ALLOWED

Open the catalog to page 4

All CAMLogic Srl catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list