Technical datasheet PFG05C

Product catalog summary

Specifications:
Model: PFG05C and PFG05C/F
Weight: 1.6 kg (PFG05C), 2.1 kg (PFG05C/F)
Power Supply: Bivoltage 115/230V (50-60Hz) - 4W, Bivoltage 24/48V (50-60Hz) - 4W, DC 24V ±15% - 4W
Signal: SPDT / max. 10A-250VAC
IP Grade: IP65
Housing: Aluminium (powder coated)
Connection: G2" 1/2 - Aluminium (PFG05C), Flange - Aluminium (PFG05C/F)
Ambient Temperature: -20 to +70°C, -40 to +70°C
Process Temperature: -20 to +70°C, -40 to +70°C
Pressure Range: +0.8 to +1.1 bar [abs], +0.8 to +5 bar [abs]
Directives: RoHS (2011/65/EU), EMC (2014/30/EU), ATEX (2014/34/EU), LVD (2014/35/EU)
ATEX Marking: Ex II 1/2 D Ex ta/tb IIIC T85°C IP65 Da/Db, Ex II 3 D Ex tc IIIB T85°C Dc (Lamp version)
IECEx Marking: Ex ta/tb IIIC T85°C Da/Db

Procedures and Options:
Low Temperature Version: Extends use to -40°C, automatic heating control
Double Dry Contact: Adds a second signal contact SPDT
Voltage Control: Alarm for power supply failure
Rotation Control: Signal for shaft rotation, 8 pulses per rotation
Signal Lamp: LED lamp for level indication, requires specific voltage
4rpm Gearmotor: Increases paddle speed for faster detection
Condensation Filter: Prevents condensation without altering IP grade
Terminal Blocks: Spring and screw terminal designs available

Materials and Density:
Various components made from AISI 304 stainless steel and PA 6, with densities ranging from 0.02 to 2.0 kg/dm3

Notes:
Model with lamp can only be installed in ATEX zone 22, marked as Ex II 3 D Ex tc IIIB T85°C Dc

Catalog excerpts

VOLTAGE CONTROL ROTATION CONTROL POWER SUPPLY VOLTAGE CONTROL ROTATION CONTROL POWER SUPPLY VOLTAGE CONTROL POWER SUPPLY Terminals : male FASTON (.250 series / 6,3x0,8 mm) ROTATION CONTROL Housing Aluminium (powder coated) Connection G2" 1/2 - Aluminium Process temperature Pressure range LOW TEMPERATURE versions only (PFG.../B) LOW TEMPERATURE versions only (PFG.../B) Ambient temperature ATEX Marking 2014/30/EU (EMC) 2014/34/EU (ATEX) 2014/35/EU (LVD) Ex II 1/2 D Ex ta/tb IIIC T85°C IP65 Da/Db Ex II 3 D Ex tc IIIB T85°C Dc (Lamp version) IECEx Marking Ex ta/tb IIIC T85°C Da/Db Via dell'Industria 12 42025 Cavriago (RE) - ITALY www.camlogic.it UNLESS OTHERWISE SPECIFIED DIMENSION ARE IN [mm] DRAWING FROM CAD SYSTEM - REFER TO 3D MODEL FOR MISSING DIMENSION - NO MANUAL MODIFICATION ALLOWED

Open the catalog to page 1

VOLTAGE CONTROL ROTATION CONTROL POWER SUPPLY ROTATION CONTROL VOLTAGE CONTROL POWER SUPPLY 2x G1/2 (BSPP) VOLTAGE CONTROL ROTATION CONTROL POWER SUPPLY Terminals : male FASTON (.250 series / 6,3x0,8 mm) AC2PLA density > 0,3 kg/dm3 Housing Aluminium (powder coated) Connection Flange - Aluminium Process temperature Pressure range LOW TEMPERATURE versions only (PFG.../B) LOW TEMPERATURE versions only (PFG.../B) Ambient temperature ATEX Marking 2014/30/EU (EMC) 2014/34/EU (ATEX) 2014/35/EU (LVD) Ex II 1/2 D Ex ta/tb IIIC T85°C IP65 Da/Db Ex II 3 D Ex tc IIIB T85°C Dc (Lamp version) IECEx Marking...

Open the catalog to page 2

AC6 INOX AISI 304 density > 0.1 kg/dm3 AC10 INOX AISI 304 density > 0.6 kg/dm3 AC9 INOX AISI 304 density > 0.2 kg/dm3 AC7 INOX AISI 304 density > 0.3 kg/dm3 AC5L INOX AISI 304 density > 0.2 kg/dm3 AC4 INOX AISI 304 density > 0.5 kg/dm3 AC3 INOX AISI 304 density > 0.3 kg/dm3 AC12 INOX AISI 304 density > 0.4 kg/dm3 AC16 INOX AISI 304 density > 0.3 kg/dm3 AC18 INOX AISI 304 density > 0.7 kg/dm3 AC17 INOX AISI 304 density > 0.4 kg/dm3 AC14 INOX AISI 304 density > 0.4 kg/dm3 AC11 INOX AISI 304 density > 0.1 kg/dm3 AC8 galvanized steel (wires) density > 2.0 kg/dm3 1 Via dell'Industria 12 42025 Cavriago...

Open the catalog to page 3

Extends the range of use of the indicator down to a minimum temperature of -40 ° C Intelligent automatic operation: when the temperature exceeds + 20 ° C it stops heating (heating OFF), it is reactivated when the temperature falls again below + 20 ° C (heating ON) SIGNAL LAMP (PFG05.../L) Adds a LED lamp on top. The lamp could be connected to NC contact (MIN level - empty), or NO contact (MAX level - full). Must define a single 24[V] power supply voltage: 48[V] 115[V] 230[V] POWER SUPPLY Must define a single 24[V] power supply voltage: 48[V] 115[V] 230[V] NOTE Model with lamp can be installed...

Open the catalog to page 4

All CAMLogic Srl catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list