Stop & Stay Multi-position gas spring Stop & Stay gas springs enable multiposition holding of a counter balanced weight over the entire stroke of the gas spring. Based on the proven standard range of Camloc gas springs, Stop & Stay’s are easy to fit with simple adjustment to determine the correct level of support. Once fitted, finger tip control allows movement to any position required. The lock-nut is adjusted to suit the application's weight (about a half turn), thereby applying a ‘stick-slip’ friction to the rod. Typically, the gas spring force is pre-set to carry the weight of the application (e.g. a canopy) in the normal manner. This allows the user to raise, lower and position the canopy in any position using the minimum of effort and in quick time. Stop & Stay gas springs are ideal for a wide variety of applications such as printer canopies, monitor arms, acoustic hoods, delicatessen counters, sunbeds and many more. Benefits • Multi-position holding of counter-balanced weights • Simple adjustment to determine correct setting • Positional control • Safe to use and operate • Maintenance free • Available in stainless steel • BS EN ISO 9001 Registered Company

An extensive range of sizes and forces Gas springs are commonly referred to by their size. The three sizes for Stop & Stay gas springs are 6-15, 8-18 and 10-23. The sizes directly relate to the diameter of the rod and the tube, for example an 8-18 will have a rod diameter of 8mm and Stop & Stay Stop & Stay Range of Stroke Lengths Range of Tube Lengths Force Range Thread Type (M) Size Range (in 5mm increments) (in 1 mm increments) (in 10 Newton increments) Other sizes are available, please contact us to discuss your application. Size & force for Vari-Lift™ versions For Vari-Lift™ versions add...