Blocklift Adjustable gas springs
2Pages

Blocklift Adjustable gas springs The Camloc range of Blocklift gas springs work like conventional gas springs, with the addition of an internal locking mechanism that can be stopped immediately in any position. This locking mechanism only allows the spring to move while the release pin, located on either the end of the piston rod or the tube end, is activated. Adjustable Blocklifts are commonly used for; back rest adjustment of passenger seats on buses, trains and office chairs, adjusting hospital beds, massage tables and wheelchairs and height adjustment on tables, desktops and school desks. The majority of Blocklift gas springs are also available in 304 and 316L stainless steel. A wide range of hydraulic, cable and lever release systems are available for Blocklift gas springs. Benefits • Self contained unit and maintainence free • Safe to use with easy positional control • Available in stainless steel • Single handed operation • A wide range of release mechanism options available • BS EN ISO 9001 Registered Company

Camloc Blocklift size availability Size Availability (mm)* Type Spring blocking Rigid in extension & compression Rigid in extension – Not lockable in compression Rigid in compression – Not lockable in extension Spring Blocking The Blocklift Range BL1 – Rigid in extension This gas spring locks the piston in extension giving total rigidity, but will permit a few millimetres of movement in compression. Once the load is released, the piston rod automatically returns to the initial position. These springs can be mounted in any position. BL2 – Rigid in compression This gas spring provides total...