*mydirectindustry

SINEAX VS30

Product catalog summary

Overview: The document provides detailed specifications and functionalities of the SINEAX series of compact signal converters, including models VS30, VS40, VS46, VS50, VS52, VS54, and VS70. These converters are designed for various applications such as Pt100, Ni100 loop powered conversion, thermocouple conversion, galvanic isolation, and voltage/current conversion.

Specifications:

Precision: All models offer a precision of 0.1%.
Thermal Drift: Less than 100 ppm/K for VS30 and VS40, and less than 120 ppm/K for other models.
Power Supply: Loop powered (5-30 VDC) for VS30, and 19.2-30 VDC for other models.
Isolation: 1.5 kV (50 Hz, 1 min) for models VS40, VS46, VS50, VS52, VS54, and VS70.

Functional Features:

Models offer various functionalities such as programmable fault and cut-off, filtering, signal inversion, and square root extraction.
VS70 includes differential mode filtering and integrated overvoltage protection.

Input and Output Data:

Input Types: Pt100, Ni100, thermocouples (types J, K, E, N, S, R, B, T), voltage, and current.
Output Types: Current (4-20 mA) and voltage (0-10 V) with specific load resistances and protection features.

Technical Data:

Dimensions: 93.1 x 6.2 x 102.5 mm.
Operating Temperature: -20 to +65 °C.
Storage Temperature: -40 to +85 °C.
Humidity: 10-90% non-condensing.
Protection Degree: IP20.

Power Supply Options:

Direct supply via spring cage terminal block or distributed supply using CB-Power-Bus connectors.
VS70 module required for systems with more than 16 devices.

Connection and Configuration:

Setup via DIP switches.
Connections through cage clamp connectors and expandable CB-Power-Bus on DIN rail guide.

Additional Features:

Digital optocoupler isolation and protection circuits against output overcurrent.
Small form factor with a width of 6.2 mm.

Catalog excerpts

Compact signal converters 6.2 mm ultra slim case

Open the catalog to page 1

Pt100, Ni100 loop powered converter Thermocouple converter with settable threshold Galvanic isolator analogue converter V / I converter with power for 2-wire transducers +DC Functional diagram Thermal drift • Fault/alarm • Dip-switch error • Fault/alarm • Alarm setting • Static relay output status General data Power supply Special functions RTD type/connection, lter, measure range, fault, output inversion and overrange • Programmable fault and cutoff • Filter • Programmable fault and cutoff • Filter • Settable rejection 50-60 Hz Pt100 (EN60751/A2-ITS90) • Range: –200…+650 °C • Minimum span: 20...

Open the catalog to page 2

Technical data Power supply range* Bridge voltage supply Bus connectors (CB-Power-Bus) can be snapped onto 35 mm DIN guide rail according to EN 60715 Wire section Wire stripping Power supply Current shunt / V – I converter Consumption without load at 25 °C Isolation technique Digital (optocoupler) Floating point 32 bit Filter Isolation • Input 1 switch on threshold • Input 2 switch on threshold • Alternate / inverted polarity of inputs Case material Operating temperature Storage temperature Clamp terminals and/or bus Protection degree • Differential mode lter • Integrated protection against overvoltages...

Open the catalog to page 3

Feature / highlights Precision • 0.1 % precision class • Resolution 14 bit Isolation • Small dimensions • 6.2 mm width • Setup via DIP switches Power supply • Digital optocoupler • 3 way isolation 1.5 kVAC (50 Hz, 1 min) • Digital decoupling of input signal • Protection circuit against output overcurrent Power supply techniques • Direct supply on the spring cage terminal block • Distributed smart supply by 2 slots CB-Power-Bus and VS70 Conventional supply • Cage clamp connectors • Expandable CB-Power-Bus connector on DIN rail guide Smart supply system Power supply on spring-cage terminals Distributed...

Open the catalog to page 4

SINEAX VS30

SINEAX VS30

Catalog excerpts

All Camille Bauer Metrawatt AG catalogs and technical brochures

Archived catalogs