Programmable transmitter

Main features The angular position transmitter KINAX WT720 serie is a precision instrument and serves the acquisition of angular position and rotation, processing and the provision of measured values as electric output signals for the downstream device. They converts the angular position of a shaft into a load-independent direct current signal, proportional to the angular position. The robust design makes the angular position transmitters of the KINAX WT720 series particularly suited to applications in rough environments. As an option is the unit with the adapter flange NLB1019 – an even more...

KINAX WT720 with adapter flange NLB1019 General data Measured quantity Angular position Measuring principle Basic accuracy / error limit Housing protection Drive shaft Ø10 mm, rust-proof hardened steel Electrical connection Ø19 mm, rust-proof hardened steel Cable gland (metal) or connector (metal, M12 × 1, 4 poles) Measuring input Measuring range 0…360° By push-buttons and switch: measuring range, zero position, sense of rotation and linear/V characteristic Measuring output Output signal Power supply Operation voltage Environmental conditions and regulations –20 °C ... +85 °C / ≤90% –40 °C ......

Product ranges of Camille Bauer Heavy-current: State, Allocation, Quality. Angular position: Angle, Inclination, Position, Volume. Printed in Switzerland • Subject to change without notice • DM-1014-000-01-EN-12.10 Process control: Temperature, Signal conversion, Process management. Rely on us. Camille Bauer AG Aargauerstrasse 7 CH-5610 Wohlen / Switzerland Phone: +41 56 618 21 11 Fax: +41 56 618 35 35 [email protected] www.camillebauer.co