*mydirectindustry

KINAX HW730

Product catalog summary

Measuring Principle
The KINAX HW730 uses a capacitive scanning system consisting of a differential screen capacitor and electronic circuitry. Angular deflection is transferred to the rotor, changing capacitance proportional to the angle, which is then converted into a proportional DC current signal.

Main Features

Robust design suitable for field applications with high mechanical and electrical safety.
Capacitive scanning system ensures no wear and low maintenance.
Vibration and shock-resistant with adjustable measuring range and output characteristics.
Analog output signal of 4…20 mA with a 2-wire connection.
Available with explosion protection and in a marine version.

Application
The KINAX HW730 is designed for precision measurement of angular position and rotation, converting these into electric output signals. It is ideal for rough environments and used in power generation, plant construction, and various industrial applications.

Dimensions and Torque Support
The device is mounted by sliding onto the drive shaft and fixed with a torque support. It includes a pin configuration for sensor connectors.

Programming
The transmitter is programmable via switches and push-buttons, allowing adjustments to zero and end positions, rotation direction, and output curve shape.

General Data

Measured quantity: Angular position with a capacitive principle.
Error limit: < ± 0.35°; Reproducibility: < 0.1°.
Housing protection: IP67 and IP69k.
Hollow-shaft diameter: Standard 30 mm, with reductions available.
Output signal: 4…20 mA, 2-wire connection.
Operation voltage: 12…30 V DC.

Environmental Conditions and Regulations

Temperature range: -40 °C to +85 °C with ≤95% humidity.
Vibration resistance: ≤100 m/s²; Shock resistance: 1000 m/s².
Complies with various EN standards for immunity and spurious radiation.

Versions

Explosion protection: ATEX and IECEX certified.
Marine version under development.

Catalog excerpts

CAMILLE BAUER Programmable hollow-shaft transmitter for angular position

Open the catalog to page 1

Main features The hollow-shaft transmitter for angular position KINAX HW730 is a precision instrument and serves the acquisition of angular position and rotation, processing and the provision of measured values as electric output signals for the downstream device. They converts the angular position of a shaft into a load-independent direct current signal, proportional to the angular position. The robust design makes the hollow-shaft transmitter for angular position KINAX HW730 particularly suited to applications in rough environments. For mounting the device is simply slid onto the drive shaft...

Open the catalog to page 2

General data Measured quantity Angular position Measuring principle Error limit Housing protection Anodized aluminum Hollow-shaft diameter Hollow-shaft bearing Ball bearing Electrical connection Spring-type terminal block or sensor plug connector metal (M12 × 1, 4 poles) Measuring input Measuring range 0…360° By push-buttons and switch: measuring range, zero position, sense of rotation and linear/V characteristic Measuring output Output signal Power supply Operation voltage Environmental conditions and regulations Temperature / relative humidity Vibration resistance Shock resistance Immunity...

Open the catalog to page 3

Product ranges of Camille Bauer Heavy-current: State, Allocation, Quality. Angular position: Angle, Inclination, Position, Volume. Process control: Temperature, Signal conversion, Process management.

Open the catalog to page 4

KINAX HW730

KINAX HW730

Catalog excerpts

All Camille Bauer Metrawatt AG catalogs and technical brochures

Archived catalogs