Angular position transmitters to be installed or surface mounted

Main features The angular position transmitters KINAX to be installed or for surface mounting are precision instruments and serves the acquisition of angular position and rotation, processing and the provision of measured values as electric output signals for the downstream device. They converts the angular position of a shaft into a load-independent direct current signal, proportional to the angular position. The compact design makes the angular position transmitters particularly suited to the installation in or mounting on devices and apparatuses. The products are used in many applications,...

General data Measured quantity angular position Measuring principle Basic accuracy Starting torque < 0.001 Ncm at 2 mm shaft < 0.03 Ncm at 6 mm resp. 1/4 inch shaft Drive shaft Housing protection Aluminium / Plastic Housing Electrical connection Soldering pins or screw terminals Soldering pins or screw terminals Cable gland / screw terminal Cable gland / screw terminal Measuring input Measuring ranges Programmable Measuring output Output signal Power supply Operating voltage Environmental conditions and regulations Temperature / relative humidity Permissible vibration Shock Test voltage Electromagnetic...

Product ranges of Camille Bauer Heavy-current: State, Allocation, Quality. Angular position: Angle, Inclination, Position, Volume. Printed in Switzerland • Subject to change without notice • DM-1018-000-00-EN-10.09 Process control: Temperature, Signal conversion, Process management. Rely on us. Camille Bauer AG Aargauerstrasse 7 CH-5610 Wohlen / Switzerland Phone: +41 56 618 21 11 Fax: +41 56 618 35 35 [email protected] www.camillebauer.com