*mydirectindustry

Catalogs
Camille Bauer Metrawatt AG
Compact Signal Converters

Compact Signal Converters

Product catalog summary

Overview: The document provides technical specifications and features of the SINEAX series of compact signal converters, including models VS30, VS40, VS46, VS50, VS52, VS54, and VS70. These devices are designed for precise signal conversion in a compact 6.2 mm ultra-slim case.

Specifications:

Precision: All models offer a precision class of 0.1%.
Thermal Drift: Less than 100 ppm/K for VS30 and VS40, and less than 120 ppm/K for other models.
Power Supply: Loop powered (5-30 VDC) for VS30, and 19.2-30 VDC for other models.
Isolation: 1.5 kV (50 Hz, 1 min) for models VS40, VS46, VS50, VS52, VS54, and VS70.
Input Types: Pt100, Ni100, thermocouples (types J, K, E, N, S, R, B, T), voltage, and current inputs.
Output Types: Current (4-20 mA) and voltage (0-10 V) outputs with specified load resistances.

Functional Features:

Programmable fault and cut-off settings, filters, and signal inversion capabilities.
Square root extraction and standard tank linearization for specific models.
Response times vary with and without filters, ranging from 40 ms to 620 ms.

Power Supply Options:

Direct supply via spring cage terminal block or distributed supply using CB-Power-Bus connectors.
VS70 module required for systems with more than 16 devices, supporting up to 75 modules.

Physical and Environmental Specifications:

Dimensions: 93.1 x 6.2 x 102.5 mm.
Operating temperature range: -20 to +65 °C; storage temperature: -40 to +85 °C.
Humidity: 10-90% non-condensing.
Protection degree: IP20.

Connection and Configuration:

Connections via cage clamp terminals and/or bus.
Configuration through DIP switches.

Additional Features:

Digital optocoupler isolation and protection circuits against output overcurrent.
Expandable CB-Power-Bus connector for easy integration on DIN rail guides.

Catalog excerpts

A CAMILLE BAUER Rely on us. Compact signal converters 6.2 mm ultra slim case

Open the catalog to page 1

< 120 ppm/K Fault/alarm • Input 1 switch on threshold • Input 2 switch on threshold • Alternate / inverted polarity of inputs Voltage Power supply Programmable ranges: • 2 inputs with shared negative • Pass-through each input can be accessed by 2 paires of terminals • Positive inputs protected by an external fuse of recommmended sizing Voltage Power supply • Range: 0...10 / 2...10 / Max voltage drop: 300 mV 0...5 / 1.5 V • Min load resistance: 2 kQ Current • Range: 4.20 / 20.4 / 0.20 / 20.0 mA • Max load resistance: 500 Q • Protection: 25 mA Technical data Power supply range* 19.2.30...

Open the catalog to page 3

Feature / highlights Precision • 0.1 % precision class • Setup via DIP switches • Small dimensions power supply • Cage clamp connectors • Expandable CB-Power-Bus connector on DIN rail guide • Digital optocoupler • 3 way isolation 1.5 kVAC (50 Hz, 1 min) • Digital decoupling of input signal • Protection circuit against output overcurrent • Direct supply on the spring cage terminal block • Distributed smart supply by 2 slots CB-Power-Bus and VS70 Power supply techniques The signal conditioners can be powered in 3 different ways: by the spring cage terminal block (24 VDC direct from power...

Open the catalog to page 4

Compact Signal Converters

Compact Signal Converters

Catalog excerpts

All Camille Bauer Metrawatt AG catalogs and technical brochures

Archived catalogs