SORTING PLANT I_S01
2Pages

Main characteristics The plant is designed for sorting recyclable waste. The main components of the system are: - Loading conveyor belt - Tearing shredder - Ferrous metals separator - Sorting platform loading belt - Sorting platform with 4 selections (8-14 operators) Functioning The material on the loading conveyor belt is fed into the shredder which, by means of specially configured blades, tears the bags containing the refusal to sort. Right after the opening of the bags, the ferrous fraction is removed by means of the ferrous metals separator. The material is then transported to the sorting platform where the operators pick the assigned material (paper, plastic, PET, wood, etc.). The selected material, and also the remains on the conveyor belt, will fall in their respective containers previously positioned underneath the sorting platform. The treatment capacity is linked mainly to the number of operators working in the sorting platform. The process capacity of the shredder is about 10-15 ton/h. CAMEC s.r.l. 35013 Cittadella (PD) Italy – Via Borgo Vicenza, 128 Tel. +39 049 9450722 – Fax +39 049 9454343 www.genius-ita.com - e-mail: info@genius-ita.com

The variations on this type of system are many and depend on environmental factors and different process requirements of incoming material. Below a list of options for this type of systems: G1 G2 G3 G4 Air-conditioned cabin, to preserve the working area of the sorting operators. Screening system for shredded material. Operation needed in case of treatment of material contaminated from “heavy” humid fraction. Dust extraction plant, where the material is dusty. Automatic baler whit loading conveyor belt for the alternate baling of various fractions. Technical data 1. Metallic chain conveyor -...