Semi-automatic retractable bollard G6 EVO
3Pages

PRODUCT SHEET Semi-automatic retractable bollard G6 EVO Semi-Automatic Dimensions GENERAL DESCRIPTION The semi-automatic bollard is adapted to the low-traffic areas management such as a square opened a few times per months for particular events, a reserved area. The semiautomatic bollard is also the best access control solution in places where there is no electrical power supply. Lock protection: The lock is protected by a bronze hatch preventing any dust or gravel from penetrating inside. Standard imprint key: T11 Safe operation: Reinforced push-to-release bar and lock bolt Reflective band: Class II (white) The semi-automatic retractable bollard must be installed out of the wheel arch. Monobloc® design Bollard head, casing and cover made of 11mm average thick cast iron material. These parts are cast as one single piece, without any weld nor wear part. Reliability 4.5 million of operations without any failure neither part replacement (Up to 1,200 operations per day over 10 years). G6 EVO bollards are intended to withstand repeated impacts, rain, frost, sand, dust, solvents agents… 10-year warranty on cast-iron material bollard head, casing and cover, even after a 2.5 tons vehicle collision at 55 km/h*. * See the “Warranty” chapter in our General Terms of Sale ISO EN 124 - E600 Class - Accepted vertical load: 60T per axle. Can be installed in areas that take heavy loads (docks and airports). In compliance with NFP98-310 standard - Regarding characteristics and performances of automatic, semi-automatic and manual retractable bollards. In compliance with the French PMR decree - All dimensions comply with the French decree of 18 September 2012 regarding technical specifications for road and public area accessibility, enabling Persons with Reduced Mobility to have the best possible day-to-day travel. The G6 EVO bollard is equipped with an innovative interchangeable sleeve system for customizing the aesthetics of access points and refurbishing any damaged bollard heads in less than 5 minutes. The bollard head is made of cast-iron material, which provides high impact resistance, covered with a steel or stainless steel sleeve. The new G6 EVO bollard has been designed to make on-site sleeve replacement easy and quick, without need of hoisting device. CAST IRON BOLLARD HEAD PAINTED SLEEVE Treatment : Anti-corrosion paint Material : Steel Design : Cylinder or Chateauneuf Treatment : Zinc-based primer as standard reinforcing corrosion-resistance RAL paint : Matt finish thermosetting polyester powder top coat (RAL7016 standard) STAINLESS STEEL SLEEVE Material : 316L Stainless Steel Design : Cylinder or Chateauneuf Treatment : Polish and satin-finished 316L stainless Steel CUSTOMIZED SLEEVE Material : Steel (Stainless Steel on request) Design : Cylinder Treatment : Zinc-based primer as standard reinforcing corrosion-resistance Customization : Customization with a logo, text, texture, advertising, or image. Finishing : anti-abrasion protection system Intellectual property of URBACO – Copying forbidden – Specifications not contractually binding - Changes may be made without prior notice - Most of the models shown are patented. URBACO S.A – a limited liability company with a capital of 1.5 M€ - Siret 33944567800032 R.C.S. AVIGNON 1999 B 40308 – VAT: FR 06 339 445 678

product sheet Semi-automatic retractable bollard G6 EVO CAME T URBACO Dimensions (mm) (ft (Bl <C <DI © Weight Impact resistance kJ Vehicule weight Speed collision [F Bollard head with customized sleeve Class II reflective tape W Reinforced push-to-release bar and lock bolt ^ Gas cylinder Casing M Cover 1 Insert the key in the lock and turn the key clockwise : the bollard unlocks. 2 Push the bollard down 3 The bollard locks. Remove the key. (4) Insert the key in the lock. Turn the key counter-clockwise. The bollard unlocks automatically, rises up and remains locked in up position....

Semi-automatic retractable bollard G6 EVO Semi-Automatic Screws Lost casing The lost casing has been designed to preserve a clean and free space during the civil works. It also ensures a proper bollard installation. Standard lost casing Lost casing with finishing frame Sleeve Painted steel sleeve* Cylinder (standard) Stainless steel sleeve Customized steel sleeve Ø200 H750 Ø250 H750 *RAL 7016 in standard, others RAL on request Visual signalling Casing plan: Reflective tape colors: - Painted steel sleeve: White - Stainless steel sleeve: Yellow - Option: Red Top cover Without light diffusers...