Catalogs >
CAME URBACO >
G6 EVO automatic retractable bollard (Pneumatic)

G6 EVO automatic retractable bollard (Pneumatic)
2Pages

Catalog excerpts

G6 EVO automatic retractable bollard (Pneumatic) - 1

Automatic retractable bollard G6 EVO Power drive (standard version) The bollard vertical thrust is enabled by a pneumatic spring (several bollards can be connected in a same technical center) Pump working pressure: 7 bars Maximum power absorbtion: 15w (the power is mainly consumed by the cabinet) Standard operating temperature range : from -0°C to +55°C (wider range in option) Rising time : 5/7 seconds Falling time : 5 seconds Fail safe : in the event of a power cut, the bollard lowers IP67 : waterproof and dustproof Monobloc® design Bollard head, casing and cover made of 11mm average thick cast iron material. These parts are cast as one single piece, without any weld nor wear part. Reliability 4.5 million of operations without any failure neither part replacement (Up to 1,200 operations per day over 10 years). Longevity G6 EVO bollards are intended to withstand repeated impacts, rain, frost, sand, dust, solvents agents... 10-year warranty 10-year warranty on cast-iron material bollard head, casing and cover, even after a 2.5 tons vehicle collision at 55 km/h*. * See the “Warranty” chapter in our General Terms of Sale ISO EN 124 - E600 Class - Accepted vertical load: 60T per axle. Can be installed in areas that take heavy loads (docks and airports). In compliance with NFP98-310 standard - Regarding characteristics and performances of automatic, semi-automatic and manual retractable bollards. In compliance with the French PMR decree - All dimensions comply with the French decree of 18 September 2012 regarding technical specifications for road and public area accessibility, enabling Persons with Reduced Mobility to have the best possible day-to-day travel. G6EVO. the concept The G6 EVO bollard is equipped with an innovative interchangeable sleeve system for customizing the aesthetics of access points and refurbishing any damaged bollard heads in less than 5 minutes. The bollard head is made of cast-iron material, which provides high impact resistance, covered with a steel or stainless steel sleeve. The new G6 EVO bollard has been designed to make on-site sleeve replacement easy and quick, without need of hoisting device. CAST IRON BOLLARD HEAD PAINTED SLEEVE |^p Options see the sheet OPTG6EVO Material : Steel Design : Cylinder or Chateauneuf Treatment : Zinc-based primer as standard reinforcing corrosion-resistance RAL paint : Matt finish thermosetting polyester powder top coat (RAL7016 standard) STAINLESS STEEL SLEEVE Material : 316L Stainless Steel Design : Cylinder or Chateauneuf Treatment : Polish and satin-finished 316L stainless Steel CUSTOMIZED SLEEVE Material : Steel (Stainless Steel on request) Design : Cylinder Treatment : Zinc-based primer as standard reinforcing corrosion-resistance Customization : Customization with a logo, text, texture, advertising, or image. Finishing : anti-abrasion protection system

Open the catalog to page 1

G6 EVO automatic retractable bollard (Pneumatic) - 2

Automatic retractable bollard G6 EVO Pneumatic CAME V URBACO Pneumatic cylinder E Casing [Q Cover Impact resistance kJ Vehicule weight Speed collision [F Bollard head with customized sleeve E Class II reflective tape E Illuminated LEDs ring Removable accessories bracket The galvanized steel removable accessories bracket has been designed to include all the necessary elements for the bollard’s operation. Inserted inside the casing, the bracket is at hand, easy to pull out, making maintenance easier. 1 Asphalt finishing surface 2 Retractable bollard 3 Electrical sheath 0100mm Lost...

Open the catalog to page 2