The bollard Is managed by an access control system and Is actuated down by the user (remote control, contactless card, keypad, etc.) and will be automati- cally upward after the passage of the vehicle. In case of.black out, a power backup system allows to main- tain the bollard In high position. The feature of the G6 range is to be composed of three structural parts, the casing, the cover and the bollard head, each molded in one only piece (Urbaco patent) guaranteeing a indeformable parallelism and ro- bustness. The electromechanical engineering can be easily managed by the URBACO centralized...

The automatic bollard rectracts Into the ground by means of remote control devices (re- mote control,contactless chip card, keypad etc.), clearing the way for traffic. The bollard automatically rises once a vehicle has passed through. Epicyclic and endless screw motor power supply Negative security Damper system process driven by break with lack of tension Unbolting by URBACO antivandalism key Rising time < 5 seconds Lowering time < 5 seconds Electric protection rating : IP67 asy to install (streamlined connection) ow cost of preventive maintenance ithout noise polution asily integrated/interchangeable...

Oven-hardened zinc primer coat for reinforced corrosion resistance and improved adhesion for top coat Matt-finish thermosetting polyester powder coating 1 Frost-protection device until -20°C and -40°C 1 Fall safe by power backup ( Inverter )

Urbaco S.A. Z.A. du Couquiou 84320 Entraigues - FRANCE www.urbaco.com - [email protected] Intellectual property of URBACO – Copying forbidden – Specifications not contractually binding - Changes may be made without prior notice - Most of the models shown are patented – 12/2009 URBACO S.A – a limited liability company with a capital of 1.5 M€ - Siret 33944567800032 R.C. CARPENTRAS 1999 B 308 – VAT: FR 06 339 445 678 DC-ELECTROMECA-EN (06-2011)