Automatic retractable bollard G6 Built-in hydraulic pump <9URBACO AUTOMATIC BOLLARDS Power drive (standard version) Built-in hydraulic pump, allowing to reduce the control cabinet size. The bollard is connected using only two electrical cables. This makes installation and commissioning easier. Pump working pressure : 35 bars Voltage in the bollard : 24V-50Hz / 230V-60Hz Maximum power absorbtion : 330w Standard operating temperature range : from -20°C to +80°C Rising time : 5/7 seconds Falling time : 5 seconds Fail safe : in the event of a power cut, the bollard lowers IP67 : waterproof and dustproof Monobloc® design Bollard head, casing and cover made of 11mm average thick cast iron material. These parts are cast as one single piece, without any weld nor wear part. Reliability 4.5 million of operations without any failure neither part replacement (Up to 1,200 operations per day over 10 years). Longevity G6 bollards are intended to withstand repeated impacts, rain, frost, sand, dust, solvents agents... ISO EN 124 - E600 Class - Accepted vertical load: 60T per axle. Can be installed in areas that take heavy loads (docks and airports). In compliance with NFP98-310 standard - Regarding characteristics and performances of automatic, semiautomatic and manual retractable bollards. In compliance with the French PMR decree - All dimensions comply with the French decree of 18 September 2012 regarding technical specifications for road and public area accessibility, enabling Persons with Reduced Mobility to have the best possible day-to-day travel. G6 retractable bollard, a lengendary robustness : The automatic retractable bollard is made to control accesses of both public and private areas. The bollard is managed by an access control system and is actuated down by the user (remote control, contactless card, keypad, etc.) clearing the way for access. It rises automatically after the vehicle has passed. CYLINDER model (A (B) Treatment : Zinc-based primer as standard reinforcing corrosion-resistance RAL paint : Matt finish thermosetting polyester powder top coat (RAL7016 standard) Visual signalling : Class II reflective tape (white) CHATEAUNEUF model A (B) Treatment : Zinc-based primer as standard reinforcing corrosion-resistance RAL paint : Matt finish thermosetting polyester powder top coat (RAL7016 standard) Visual signalling : Class II reflective tape (white) Intellectual property of URBACO - Copying forbidden - Specifications not contractually binding - Changes may be made without prior notice - Most of the models shown are patented. URBACO S.A - a limited liability company with a capital of 1.5 M€ - Siret 33944567800032 R.C.S. AVIGNON 1999 B 40308 - VAT: FR 06 339 445 678

Built-in hydraulic pump V URBACO AUTOMATIC BOLLARDS Dimensions (mm), weight and impact resistance ^ Bollard head [G| Class II reflective tape [Hi Removable accessories bracket W, Built-in hydraulic pump assembled Hydraulic cylinder and hydraulic hose E Casing [L Cover The galvanized steel removable accessories bracket has been designed to include all the necessary elements for the bollard’s operation. Inserted inside the casing, the bracket is at hand, easy to pull out, making maintenance easier. 1 Asphalt finishing surface 2 Retractable bollard 3 Electrical sheath 0100mm Lost casing (5 PVC...