Intellectual property of URBACO – Copying forbidden – Specifications not contractually binding - Changes may be made without prior notice - Most of the models shown are patented – 12/2009 URBACO S.A – a limited liability company with a capital of 1.5 M€ - Siret 33944567800032 R.C. CARPENTRAS 1999 B 308 – VAT: FR 06 339 445 678 Fixed energy dispensing units Description • The BFDE Energy Dispensing Fixed Post was created to facilitate multiple 16, 32 and ultiple 63 ampere, low-voltage connections. It comes in the simple version (with up to six, 16 with spensing A sockets) or double (up to twelve 16 A sockets), in the electricity dispensing version, the waterdispensing version and the mixed version: electricity and water. The highly-solid er. o Fixed Energy dispensing unit is long lasting despite being exposed to the elements in public areas. Features • A cast aluminium base to fix the power supply unit to the ground. • A cast aluminium central part, with door, 2-point safety lock and stainless steel key. nless • A cast aluminium cap. • Oven-hardened zinc primer coat for reinforced corrosion resistance and giving improved adhesion to top coat. • Matt-finish thermosetting polyester powder coating. Double version Simple version

Ground works Technical drawing Ø14mm for threaded anchoring bolts Légende : 1 - Cast aluminium base to fix the power supply unit to the ground2 - Lower part in cast aluminium 3 - Upper part in cast aluminium 4 - cast aluminium cap KEY: 1 – Cross section of pedestal 2 – Anchoring bolts M12x200mm 3 – Conduit(s) Ø63mm or Ø100mm A – Surfacing B – Concrete foundation L=700 w=500 P=500 (mm) C – Natural soil Ø14mm for threaded anchoring bolts Note 1: Embedding is exactly the same for a double BFDE. Note 2: When the BFDE is intended for water and power supply, two conduits will be necessary to well separate...