Catalogs >
CAME URBACO >
Fixed bollard ONE50EVO

Fixed bollard ONE50EVO
2Pages

Catalog excerpts

High-security Certification IWA 14-1:2013 Bollard V/7200[N3C]/80/90:5,9* Certification PAS68:2013 Bollard V/7500[N3]/80/90:5,6/27,2* ONE50eVO A single high-security ONE50EVO fixed bollard can withstand the impact of one truck travelling at 80 km/h. The ONE50EVO high-security fixed bollard is designed to protect strategic access points and sensitive sites from terrorist attacks. The ONE50EVO fixed bollard is the ideal solution to complete an automatic bollards installation keeping the same aesthetic. CAME V URBACO Characteristics Dimensions (mm) : 0325 H1000 (above ground) Material: high-strength steel Treatment: hot-dip galvanising of the bollard Total weight: 430 kg ■Test 2015 — f Crash-test of one truck on the ONE50EvO fixed bollard according to the IWA 14-1:2013 and PAS68:2013 standards. The crash test demonstrated the strength and high level of security of the ONE50EVO fixed bollard. Certification: IWA 14-1:2013 Bollard V/7200[N3C]/80/90:5,9* Impact energy: 1 763,2kJ Report no. 1207615-001-01 available on request Certification: PAS68:2013 Bollard V/7500[N3]/80/90:5,6/27,2* Impact energy: 1 763,2kJ Report no. 1207615-001A-01 available on request Interpretation of the IWA 14-1: 2013 Bollard V / 7200 [N3C1 / 80 / 90 : 5,9 i Type of product (bollard) Type of test (vehicle) Type of vehicle Vehicle weight (kg) Impact speed (km/h) Intellectual property of URBACO - Copying forbidden - Specifications not contractually binding - Changes may be made without prior notice - Most of the models shown are patented. URBACO S.A - a limited liability company with a capital of 1.5 M€ - Siret 33944567800032 R.C.S. AVIGNON 1999 B 40308 - VAT: FR 06 339 445 678 —1 Impact angle (°) Penetration of the vehicle (m)

Open the catalog to page 1

PRODUCT SHEET High-security Bollard cladding The ONE50EVO bollard is equipped with an innovative interchangeable sleeve system that allows you to customise the appearance of the access points and repair damaged heads in under 5 minutes. Painted sleeve Material: steel Treatment: zinc-based primer as standard reinforcing corrosion-resistance RAL paint: Matt finish thermosetting polyester powder top coat (RAL3020 standard) Stainless steel sleeve Material: 316L Stainless Steel Treatment: polish and satin-finished Customized sleeve Material: steel (stainless on request) Treatment : zinc-based...

Open the catalog to page 2