CAME GROUP PRODUCT SHEET Cityl Controller Article Code: C1S0000 URBACO .1 AUTOMATIC BOLLARDS DESCRIPTION The Cityl controller without automation is capable to integrate position lights, control actuators and / or operation logic. This City1 controller is normally associated with a cabinet or another controller (City3, 5 or 6) with built-in PLC (U100, U200 or Logo!) The City1 controller is meant to be fixed to the ground on its embedding base (7). Technical compartment (2) is accessible from the front. A trap door opens onto a push button to force descent of bollard. Finally, a polycarbonate (or aluminium) printed front face with a position light red/amber and/or control actuators. The controller is delivered without control actuators. These are available as options. COMPONENTS 1- City1 controller, 2- Access to technical components, lock, 3- Emergency trap door with special square imprint for fire-fighters, 4- Polycarbonate front face, not printed, (dimensions 258 x 140 mm), 5- Key to emergency trap door, 6- Key to technical compartment, 7- Embedding base. OPTIONS & ACCESSORIES - Colours: other RAL shades available as options, - Position lights: red / amber, - RE432 radio receiver, - Beepers 1, 2 or 4 channels (ex. (8) (9)), - Antenna 433.92 MHz, - Key selector, - Keypad, - Card reader, - Logical operation - Communication tools (analog or digital intercom), - Switch to force descent. SURFACE FINISH Primer zinc coating to increase resistance to corrosion and add on adherence to the surface finishing. Thermosetting polyester powder paint, matt finish, Standard colour: Charcoal grey RAL 7016 Z.A. du Couquiou - 84320 ENTRAIGUES - France Tel. +33 490 480 800 - Fax +33 490 480 088 - e-mail : [email protected] - www.urbaco.fr Intellectual Property of URBACO - Not to copy - Specifications are not contractual - Changes likely to be made without any notice - Most of the models shown are registered - June 2006