Simple Version DESCRIPTION The fixed bollard for power supply has been designed to make multiple voltage connections easily depending on setup. 3 socket types available for low voltage: 16 Amp (2 Poles+Earth), 32 Amp (3 Phases+Neutral+Earth) and 63 Amp (3 Phases+Neutral+Earth). Each socket is protected by its own 30 mA differential breaker, gauged according to socket. The great resistance of the fixed unit for power supply allows durable exposure in public areas. The fixed bollards for power supply are designed and built with the greatest care, according to strict quality and safety specifications. Two models are available as fixed units: - BFDE, simple: up to 6 x 16A socket connections. - BFDE, double: up to 12 x 16A socket connections. See our catalogue for the various possibilities. The fixed bollard for power supply is meant to be installed by fastening mason screws in a concrete slab. 1- BFDE, simple with 6 x 16A sockets 2- BFDE, double with 6 x 16A sockets and meter, 3- 16A 30mA differential breaker 4- Sockets 16Amp 2Poles+Earth with spring loaded protection flap, 5- Power supply panel, pre-wired. SURFACE FINISH DESCRIPTON: power supply panel As a standard: Dry Protector primer for better adherence of the finish coating on aluminium. Thermosetting polyester powder coating, matt finish. Standard colour: RAL 7016 (Charcoal grey) OPTIONS & ACCESSORIES - Colours: other RAL shades available on request Inside the fixed bollard for power supply: HYPRA IP44 (EU standard) sockets. Each socket has its own 30 mA differential breaker for the protection of users. All components are mounted inside a plastic box. Breakers are protected behind a transparent cover. The panel is pre-wired with 6 metres of cable for connection to the mains network. The double version is available with an electricity meter: the upper part integrates the panel (as shown in ‘5'); the lower part is equipped with an aluminium plate designed for the installation of your local electricity board panel (not delivered). Intellectual Property of URBACO - Not to copy - Specifications are not contractual - Changes likely to be made without any notice - Most of the models shown are registered - April 2006 E-mail: [email protected] www.urbaco.fr

PRODUCT SHEET Fixed Bollard for Energy Supply (BFDE) CAME GROUP Single & Double Version - Power and/or Water Supply URBACO .1 AUTOMATIC BOLLARDS Single Version Dimensio ns Height Weight DESCRIPTION Fixed Bollards for Energy Supply are designed to make multiple power and / or water connections depending easily in 16, 32 or 63 Amps. - For power, 3 types of sockets are available in low tension: 16Amp 2P+E, 32Amp 3P+N+E and 63Amp 3P+N+E. Each socket is individually protected with a 30mA ground-fault circuit interrupter (depending on socket). - For water, 1 type of valve is available: % turn 0...