LeakVIEW Automatic Visual detection of packaging leaks through either bubble emissions, burst testing or altitude simulation testing. The LeakVIEW is an ideal seal integrity tester for a range of packaging within the food, consumer and medical device industries. Enhanced by its clear Perspex housing, the LeakVIEW provides optimum visual detection of leaks. User-friendly and low maintenance, the system is able to identify holes smaller than 20 microns and can operate in compliance with ASTM D6653 and ASTM D3078 standards. When carrying out bubble emissions testing, the chamber is filled with water. During the test phase, the head-space is placed under a vacuum, causing the inserted packaging to inflate. Should any leaks be present, a stream of bubbles will be emitted. Water is not required for altitude simulation or burst testing. The system is programmed from a colour touchscreen display for method development and can then be locked to prevent unauthorised changes. Automatic test cycles are initiated by a simple press of the start button. The display will indicate the end of the test cycle. In the case of altitude simulation, ascent and descent profiles can be displayed graphically. Custom configurations are available to tailor the LeakVIEW to each individual’s requirements. An alternative option to automatic operation of the system is the manual version that does not require an electrical supply. A range of sizes are available to suit your requirements. An essential piece of equipment for any packaging facility, the LeakVIEW is fundamentally able to test any sealed packaging component with a head space. Bubble emission testing Dry vacuum burst testing Altitiude simulation testing standard features to enhance Automated control configurable customer LeakVIEW range possesses a number of

Food Packaging - e.g. crisps, snacks, coffee, dairy, meat and fruit & vegetables Medical Devices - e.g. blister trays, testing kits, implants and pouches Consumer Products - e.g. cleaning, pet, sexual health, toiletries and cosmetics Dynascan. Unit 29 Stephenson Road, St Ives, Cambs, PE27 3WJ, United Kingdom Due to continuous product development necessary changes to specifications may be made without prior notice. Issue no: V1-2018