Catalog excerpts
Energy saving circulating pumps with flanges for sanitary hot water Construction Energy saving variable speed circulating pump driven by a permanent magnet synchronous motor (pm) controlled by on board inverter. Bronze pump casing. Sanitary hot water systems. Operating conditions - Liquid temperature from -10 °C to +110 °C - Ambient temperature from 0 °C to +40 °C - Maximum permissible working pressure: 6/10 bar - Storage: -20°C/+70°C max. relative humidity 95% at 40 °C - Certifications: in conformity with CE requirements - Sound pressure ≤ 54 dB (A). - Minimum suction pressure: - 0,5 bar at 50 °C. - 0,8 bar at 80 °C. - 1,4 bar at 110 °C. - Maximum glycol quantity: 20%. - EMC according to: EN 55014-1, EN 55014-2 EN 61000-3-2, EN 61000-3-2. - Connections: Flanges according to PN 6/10, EN 1092-2, DN 40, 50, 65, 80, 100. - The benchmark for most efficient circulators is EEI ≤ 0,20. Synchronous motor with permanent magnet. - Motor: variable speed - Standard voltage: single-phase 230 V (-10%;+6%) - Frequency: 50 Hz - Protection: IP 44 - Insulation class: H. - Overload protection (integrated). - Cable: phases and neutral. - Constructed in accordance with: EN 60335-1, EN 60335-2-51. Series Version for sanitary hot water DN ports in mm With flanges Max. head in dm connection size mm Features Smart pump NCE GS.F adapt its functions to the system: the circulator measures the pressure and the flow and adjusts the speed to the selected pressure. There are different operating modes selectable from the control
Open the catalog to page 1Energy saving circulating pumps with flanges for sanitary hot water Operating modes Automatic mode (factory setting): In this mode the pump automatically sets the operating pressure, depending on the hydraulic system. This mode is recommended in most systems. Proportional pressure mode: The circulator changes the pressure propotionally to the current flow. The pressure value can be adjusted with the + and - buttons. Constant pressure mode: The circulator mantains the pressure constant when the reference flow changes. The pressure value can be adjusted with the + and - buttons. Operating...
Open the catalog to page 2Energy saving circulating pumps with flanges for sanitary hot water
Open the catalog to page 3Energy saving circulating pumps with flanges for sanitary hot water Pump casing Stainless steel Stainless steel Thrust bearing Stainless steel jacket Copper wire Electronic card
Open the catalog to page 4All Calpeda catalogs and technical brochures
-
Close Coupled Centrifugal Pumps
16 Pages
-
NM, NMS 60 Hz
16 Pages
-
NM, NMD
12 Pages
-
PMAT
1 Pages
-
Catalot 50 hz
624 Pages
-
catalog 60 hz
463 Pages
-
MP 60Hz
5 Pages
-
MP 50Hz
4 Pages
-
GM 10
2 Pages
-
GQN
4 Pages
-
E-MXP
8 Pages
-
CS, CS-R. FK
12 Pages
-
NCE EI
4 Pages
-
NCE H
5 Pages
-
NCE H F
5 Pages
-
NCE G F
5 Pages
-
NCED G F
5 Pages
-
NCE EL
4 Pages
-
NCE ES
4 Pages
-
NCE PS
4 Pages
-
NCS3
3 Pages
-
NC3
4 Pages
-
NCD3
3 Pages
-
NCD
8 Pages
-
IDROMAT
2 Pages
-
EASYMAT
4 Pages
-
VARIOMAT
2 Pages
-
BS
90 Pages
-
AUE, AUD, AUED
20 Pages
-
QM, QT
25 Pages
-
MXH
12 Pages
-
N, N4
26 Pages
-
NM, NMD
12 Pages
-
GENERAL CATALOGUE 60HZ
378 Pages
-
GENERAL CATALOGUE 50HZ
584 Pages