Excelog 6 6 Channel Handheld Temperature Data Logger with Touch Screen • 4 x thermocouple inputs and 2 x RTD inputs Display and log all 6 channels simultaneously or individually Data logging to SD Card, or PC via USB interface Powered by built-in battery, USB or mains adapter (included) Touch screen with backlight Built-in stand Free software available Modbus interface for integration into third-party software 2-channel scrolling temperature chart Alarm indication for each channel CE Marked and RoHS 2 Compliant GENERAL SPECIFICATIONS Inputs 4 x thermocouple inputs (any of the below types), for use with miniature thermocouple connectors, plus 2 x RTD inputs, spring clamp, for 2-wire or 3-wire RTDs, 28 to 16 AWG Input Type Temperature Range Accuracy of Excelog only (whichever is greater) Intuitive touch screen interface English, Spanish, French, German, Italian, Chinese and Japanese languages Fully configurable; no additional hardware is required for configuration Each channel is configurable separately for input type, maths, alarms and display options Firmware updates via USB Temperature Resolution 0.1° for temperatures below 1000° (C or F) 1° for temperatures above 1000° (C or F) 2.83” (72 mm) resistive touch TFT, 320 x 240 pixels, backlit Configurable Parameters Temperature units, alarms, signal processing, date and time, data logging, power options, graph channels Temperature Units Alarm Configuration Signal Processing Display response time Operating Temperature Power Supply Battery Life (typical) 12 x visual alarms (2 per channel) with adjustable level, individually configurable as HI or LO. Average, minimum, maximum, standard deviation, temperature difference between 2 channels Temperatures update every 1 s 0 to 50°C Built-in rechargeable Li-ion battery, or USB, or 5 V DC mains adapter (included) Temperature Graph Two selectable channels are displayed. Scroll back in time to view chart history. 32 hours while logging with full display brightness Up to 96 hours while logging in power saving mode Charge Time 6 hours (with supplied mains adapter) DATA LOGGING SPECIFICATIONS Data Logging Interval Max. SD Card Capacity Variables Logged File Format Configurable Parameters 1 to 86,400 seconds (1 day) 32 GB SD or SDHC (4 GB SD Card included - approx 2 years of data) Measured temperature, cold junction temperature, alarm events .csv (can be imported to Excel) Sample period, number of samples, scheduled start date/time (or manual start/stop) 6-channel data logger with 4 GB SD Card, USB cable and 5 V DC mains adapter ACCESSORIES ELMAU ELSD ELCALCERT Spare mains adapter Spare 4 GB SD Card Calibration certificate, UKAS traceable Calex Electronics Limited PO Box 2, Leighton Buzzard, Bedfordshire, England LU7 4AZ Tel: +44 (0) 1525 373178 | [email protected] | www.calex.co.uk